Attention: Have 2 pages to see today

Author Topic: Guages  (Read 1834 times)

December 09, 2011, 12:35:07 PM
Reply #30

Mark Sr

  • Information Offline
  • Posts: 183
Re: Guages
« Reply #30 on: December 09, 2011, 12:35:07 PM »
Hey Bob,

The reason I ask this was because I was on Great Skipper looking at gauge sets and some have the plug in type for all 5 gauges.

Mark Sr
 
 \'98 Aquasport 245 Tournament Master

December 09, 2011, 12:54:23 PM
Reply #31

Blue Agave

  • Information Offline
  • Posts: 1495
Re: Guages
« Reply #31 on: December 09, 2011, 12:54:23 PM »
As far as condensation goes my original gauges lasted me ten years. Two winters ago I replaced the console in my boat and I also replaced the gauges so everything would have that new look.  There was nothing wrong mechancially with the ten year old gauges which were hard wired. Hope that helps.

1975 19-6
3.0 EFI Mercury 150 4S
"Don't count the days make the days count." - Muhammad Ali

December 09, 2011, 01:01:56 PM
Reply #32

Blue Agave

  • Information Offline
  • Posts: 1495
Re: Guages
« Reply #32 on: December 09, 2011, 01:01:56 PM »
My gauges are similar in appearance to the photo you posted. I believe they are the "Euro White".  With the white background, black alphanumeric symbols, and black bezel they look very sharp!


1975 19-6
3.0 EFI Mercury 150 4S
"Don't count the days make the days count." - Muhammad Ali

December 09, 2011, 01:40:01 PM
Reply #33

Mark Sr

  • Information Offline
  • Posts: 183
Re: Guages
« Reply #33 on: December 09, 2011, 01:40:01 PM »
Yes,they are Euro white.They do look sharp.
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

December 09, 2011, 06:32:29 PM
Reply #34

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Guages
« Reply #34 on: December 09, 2011, 06:32:29 PM »
Quote from: "Mark Sr"
Hey Bob,

The reason I ask this was because I was on Great Skipper looking at gauge sets and some have the plug in type for all 5 gauges.


You don't want those.  Those gauges were special built for an OEM that wanted to speed up production time.  Note the pigtails off each gauge, they used to mate to a harness...now they don't, and you have to butt splice everything together...


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal