Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: LED Question  (Read 648 times)

November 16, 2011, 08:45:47 AM
Read 648 times

Fletch170

  • Information Offline
  • Master Rebuilder
  • Posts: 630
LED Question
« on: November 16, 2011, 08:45:47 AM »
Hey guys, just bought a few small waterproof LED lights for the bow fishboxes.

Are the LED's ok to wire just like normal bulbs? I recall (from building old honda motorcycles) that LED turn signals would not work. Do I need a resistor or something along those lines?

Any help would be appreciated!

Kind Regards,

-Fletch
Logged
1981 2100 CC Hydra Sport
1976 170 (sold)
November 16, 2011, 09:31:25 AM
Reply #1

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: LED Question
« Reply #1 on: November 16, 2011, 09:31:25 AM »
Here's a start.
viewtopic.php?p=18377#p18377
viewtopic.php?p=22522#p22522

The Resource forum is your friend.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
November 16, 2011, 10:54:57 AM
Reply #2

John Jones

  • Information Offline
  • Posts: 2829
Re: LED Question
« Reply #2 on: November 16, 2011, 10:54:57 AM »
If you bought LEDs rated for 12v you are good to go just like they are.
Logged
Politics have no relation to morals.
Niccolo Machiavelli
November 16, 2011, 12:39:12 PM
Reply #3

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: LED Question
« Reply #3 on: November 16, 2011, 12:39:12 PM »
LEDs do not work for turn signals since they do not draw enough current to trip the flasher.
Logged
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90
November 16, 2011, 01:42:22 PM
Reply #4

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: LED Question
« Reply #4 on: November 16, 2011, 01:42:22 PM »
Thank God we don't need turn signals on boats!!  

Marine LEDs, you wire just like a regular incandescent.  The older LEDs used external drivers, now the new stuff has either gotten rid of the need for drivers, or the drivers are built into the light...
Logged


Corner of 520 and A1A...
November 16, 2011, 01:58:07 PM
Reply #5

John Jones

  • Information Offline
  • Posts: 2829
Re: LED Question
« Reply #5 on: November 16, 2011, 01:58:07 PM »
Quote from: "wingtime"
LEDs do not work for turn signals since they do not draw enough current to trip the flasher.

You just have to buy an electronic flasher to replace the heat operated flasher.

http://www.napaonline.com/Catalog/Catal ... 0329947726
Logged
Politics have no relation to morals.
Niccolo Machiavelli
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal