Attention: Have only 1 page to see today

Author Topic: Bennett M120 on 215 DC  (Read 525 times)

June 09, 2012, 11:53:32 AM
Read 525 times

dxs217

  • Information Offline
  • Posts: 65
Bennett M120 on 215 DC
« on: June 09, 2012, 11:53:32 AM »
West Marine has the M120s on sale for $400. Seems like a good price.

Question: Where do you mount the Hydro Power Unit on a DC?

Starboard rear storage (under seat) contains two batts, fuze box, and batt switch. Very little room here.

Port rear storage has oil reservoir and RACOR fuel filter. Probably not a good idea to mount it here either...

Can this be done with the two batt config?

Smart tabs a viable option?

Thanks
Dan
1999 215DC
Evinrude 200 FICHT


June 09, 2012, 01:50:36 PM
Reply #1

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: Bennett M120 on 215 DC
« Reply #1 on: June 09, 2012, 01:50:36 PM »
TabMan - please pick up the white courtesy phone.   :thumleft:
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


June 09, 2012, 11:52:10 PM
Reply #2

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: Bennett M120 on 215 DC
« Reply #2 on: June 09, 2012, 11:52:10 PM »
Quote from: "dxs217"
Question: Where do you mount the Hydro Power Unit on a DC?

With long enough piping, you can mount it under your console area.
On my CCP, it was mounted under the center console on top of the  factory tackle box.

Quote from: "dxs217"
Port rear storage has oil reservoir and RACOR fuel filter. Probably not a good idea to mount it here either...

Because? :scratch:
Lack of space?
The unit isn't real large. Currently, mine is located in the port storage compartment with my oil tank on my WAC.

Quote from: "dxs217"
Can this be done with the two batt config?

Sure. Number of batteries has no bearing on unit operation other than space constraint.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

June 10, 2012, 09:04:59 AM
Reply #3

dxs217

  • Information Offline
  • Posts: 65
Re: Bennett M120 on 215 DC
« Reply #3 on: June 10, 2012, 09:04:59 AM »
The "two batt" question was based on:
1. No room in rear starboard compartment (due to batteries taking up all space).
2. Being a chicken, I didn't like the idea of mounting an electrical unit near the RACOR/Oil Res...
3. Didn't realize the helm was an option. With 20' of hydro tubes included, this a great option. Plenty of room in the helm.

Thanks for the info Capt Bob.
1999 215DC
Evinrude 200 FICHT


June 10, 2012, 12:39:18 PM
Reply #4

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: Bennett M120 on 215 DC
« Reply #4 on: June 10, 2012, 12:39:18 PM »
My pleasure.
Depending on the bells and whistles you add, all/most of your electrical should end up under the helm.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

June 10, 2012, 12:47:04 PM
Reply #5

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Bennett M120 on 215 DC
« Reply #5 on: June 10, 2012, 12:47:04 PM »
I've done many an install with the pump in the console.  Works just fine...


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal