Attention: Have 2 pages to see today

Author Topic: Bimini top replacement  (Read 388 times)

May 23, 2011, 03:21:56 PM
Read 388 times

CThomps

  • Information Offline
  • Posts: 76
Bimini top replacement
« on: May 23, 2011, 03:21:56 PM »
My bimini top has expired.  It's given me quite a few years of service but it's dead.

My boat is an '86 200 Osprey.  Nadaguides says my beam is 7'8".

I found a bimini on craigslist for $150 that looks brand new.  It's aluminum framed but every other bimini top i've ever had has been aluminum as well.  

The lister says the bimini is 7'6" wide.  I'm gonna make a not so wild assumption that this will fit my aquasport about perfectly.

Any thoughts?

May 23, 2011, 04:50:08 PM
Reply #1

dbiscayne

  • Information Offline
  • Posts: 279
Re: Bimini top replacement
« Reply #1 on: May 23, 2011, 04:50:08 PM »
you should check the height too, theres at least 3 common heights from 42" to 54", don't wanna get stuck with something too low.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal