Attention: Have 2 pages to see today

Author Topic: 170 bow rail  (Read 1277 times)

January 13, 2006, 08:01:10 AM
Read 1277 times

JimCt

  • Information Offline
  • Posts: 1848
170 bow rail
« on: January 13, 2006, 08:01:10 AM »
Have noticed some of the 170's in our group have a bow rail, others don't.  Was it an option?  Was it removed just to allow for a more open fishing platform?
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22

January 13, 2006, 09:44:47 AM
Reply #1

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Bow rails
« Reply #1 on: January 13, 2006, 09:44:47 AM »
Stainless bow rails were an option on 170s, 196s, and 222s.  The vertical rod racks on the console were also an option, but most of them came with the rod racks.  The transom mounted baitwells were another option, along with several canvas choices.
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


January 13, 2006, 12:39:55 PM
Reply #2

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #2 on: January 13, 2006, 12:39:55 PM »
Thanks for the info!
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22

January 13, 2006, 03:10:01 PM
Reply #3

Mr. Osprey

  • Information Offline
  • Posts: 113
(No subject)
« Reply #3 on: January 13, 2006, 03:10:01 PM »
Was the type of rail also and option? Haven't quite seen one like mine around.
Mr. Osprey

1971 Mako 17 Angler
1986 Evinrude 88 SPL

January 13, 2006, 03:43:07 PM
Reply #4

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
170 bow rail
« Reply #4 on: January 13, 2006, 03:43:07 PM »
I uploaded a picture of a 170 with the factory bow rail from the 1980 brochure.  Most of the rails from the 70s and 80s looked like this.  

Check it out at:
http://www.classicaquasport.com/gallery ... 513/page/1
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


January 13, 2006, 04:08:41 PM
Reply #5

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #5 on: January 13, 2006, 04:08:41 PM »
My rails are aluminum, not S.S.
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22

January 13, 2006, 08:02:32 PM
Reply #6

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: 170 bow rail
« Reply #6 on: January 13, 2006, 08:02:32 PM »
Quote from: "GoneFission"
I uploaded a picture of a 170 with the factory bow rail from the 1980 brochure.  Most of the rails from the 70s and 80s looked like this.  

Check it out at:
http://www.classicaquasport.com/gallery ... 513/page/1

Nice looking boat but it could use a few batteries in the back to make it look normal  :roll:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal