You reached the limit of pages to see for today

Author Topic: matching gel coat paste?  (Read 1604 times)

September 27, 2010, 12:27:03 AM
Read 1604 times

fishingdave

  • Information Offline
  • Posts: 48
matching gel coat paste?
« on: September 27, 2010, 12:27:03 AM »
i want to get some paste to fix all the little chips that i have. where do you finding matching paste? 2005 white hull topside.

dave
2005 aquasport 225 explorer
2005 Yamaha 200F

September 27, 2010, 12:38:58 AM
Reply #1

bumpster

  • Information Offline
  • Posts: 165
    • http://www.xtremeled.com
Re: matching gel coat paste?
« Reply #1 on: September 27, 2010, 12:38:58 AM »
good luck with that. Used to be able to get it straight from the dealer but no more dealers

September 27, 2010, 08:27:59 AM
Reply #2

MarshMarlowe196

  • Information Offline
  • Posts: 976
    • http://www.keywestboatsforum.com
Re: matching gel coat paste?
« Reply #2 on: September 27, 2010, 08:27:59 AM »
Seems like they're aren't too many shades of gelcoat to choose from when it comes to white.  Really just white and off-white.  It will probably be hard to match anything exactly to the color you have because gelcoat MFG's don't offer sun-faded white  :?  .
Key West 1720 / Yam C90

Sold: 1973 Aquasport 19-6

September 27, 2010, 12:05:44 PM
Reply #3

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: matching gel coat paste?
« Reply #3 on: September 27, 2010, 12:05:44 PM »
Give these guys a call...http://www.spectrumcolor.com/.  They should be able to match...


Corner of 520 and A1A...

October 04, 2010, 10:43:43 PM
Reply #4

Hardwater

  • Information Offline
  • Posts: 81
Re: matching gel coat paste?
« Reply #4 on: October 04, 2010, 10:43:43 PM »
Seriously, not trying to bash Spectrum but after using Spectrum twice for 'factory' color repros on hulls that hadn't taken much of a UV beating (northern short season hulls stored inside) - Spectrum wasn't even close.  Read similar reports on disappointing matches from some - others have reported better results.

Personally, excellent results from these guys for color reproduction for one 'factory' color and two chip matches:

http://www.minicraft.com/retail/aquasport.htm

Outstanding customer service each time they've been used.

Just my experience.
\'86 222 CCP
\'88 Mercury 200hp Black Max

October 05, 2010, 08:36:49 AM
Reply #5

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: matching gel coat paste?
« Reply #5 on: October 05, 2010, 08:36:49 AM »
Good job, Hardwater!  Actually, most OEM's use Spectrum to supply owners, maybe they should look at minicraft... :shock:


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal