Start of rebuild 17' 1975

[17.75]

Day 1 (sat) moved boat

Day 2 (tues) 2h-Shop 4h-Work= 6h
         Pulled and labled all consel wireing.
         Pulled leaning post
         Pulled gastank nice 3 inch hole in the side.  I think it was done when I was scraping off the fiberglass they used to hold the tank in place prior to adding the foam.  Might not, the foam and gas tank box smelled of gas before I started working. Tank came out easily after clearing the foam. Tank measured 56.25 X 19.75 X 6 inches for a total of 29 gallons.  

Day 3 (wed-tomorrow) plan is to get as much of the floor up as possible. I only have about 3 hrs of time to work on it so I am shooting for at least half. The back half preferably since I am dieing to see what kind of condition the transom is in.

Day 4 (thur) Finsh floor removal and start on Stringers for refoaming.

Sorry if these pics are not great I forgot my cammera and had to use my phone.

http://s805.photobucket.com/albums/yy334/17-75/

Ill keep posting.

[slvrlng]

Go back into your photobucket account and resize your pics to "large" format. Max 480 high, then copy and paste them into a post. This makes it easier to scroll through your project without having to go to a link.

Oh yeah, welcome into the wonderful world of rebuilding Aquasports!

[17.75]

Thx for the info. I will work on getting them over into the post.

Day 3 (today) 1h-shop 2h-work= 3h
           Did not get at any of the floor.
           Measured for floor and bimini/T-Top
           Was talking to friend and told him I was going to put together a template before I cut up the floor. He sugested I use cardboard. I was originally going to use 24" rolls of Craft paper. I still might tomorrow. Cardboard was hard to work with, but the job is done now. Hate to re-do it.
           Also I took a ton of pictures and updated the photo bucket

http://s805.photobucket.com/albums/yy334/17-75/

Think its original Paint??

Day 4 ( get floor UP!) Transum question needs to be answered.