First Time Aquasport Owner 275 Explorer

[family guy]

FG
Here are the measurements of the logo
275 is 6" long x 1 1/4" high
EXPLORER is 14" long x 1 1/4 inches high

I think when I do mine I might go 2" high anyway let me know how you make out with yours and the name of the company you use. Let me know if I can help you with anything else and best of luck with the boat.

DT,

Thanks again.. I appreciate you getting the measurements for me..

FG

[family guy]

FG
Here are the measurements of the logo
275 is 6" long x 1 1/4" high
EXPLORER is 14" long x 1 1/4 inches high

I think when I do mine I might go 2" high anyway let me know how you make out with yours and the name of the company you use. Let me know if I can help you with anything else and best of luck with the boat.

DT,

Thanks for all your help..I was looking at your boat pics and noticed you had a cutting board mounted.. What size is that and did it come with the mounting posts?? Also, have you looked at getting outriggers for your boat.. The place I bought the boat from said that I couldn't get the taco top mount. Said the roof wouldn't properly hold them.. Mentioned I needed to mount them instead, weld them to my frame..

FG

[Double Trouble]

I built the cutting board and bought the sockets and stainless pipe in a marine supply.As for the outriggers my boat had them factory installed,they were mounted to the roof with bolts.I had no use for them, I use rod riggers, so I removed them.I dont know how strong they were the way they were mounted. I would ask Seabob since he was at Aquasport when the 275s were made.