Attention: Have 2 pages to see today

Author Topic: 215 Explorer. Draft question  (Read 1055 times)

January 12, 2010, 09:38:47 PM
Read 1055 times

waterman

  • Information Offline
  • Posts: 82
215 Explorer. Draft question
« on: January 12, 2010, 09:38:47 PM »
Have a 1998 215 explorer with a 200 evenrude how much water does it need with motor up and how much with motor down. Thankyou

January 13, 2010, 09:36:57 AM
Reply #1

cdoyal

  • Information Offline
  • Posts: 161
Re: 215 Explorer. Draft question
« Reply #1 on: January 13, 2010, 09:36:57 AM »
My generic AS manual says 33" down but doesn't list the draft with the motor up.
1997 245 Explorer w/225 Johnson Ocean Runner

January 13, 2010, 07:41:38 PM
Reply #2

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 215 Explorer. Draft question
« Reply #2 on: January 13, 2010, 07:41:38 PM »
The info i have is 16'' engine up 29" down that should be close to what you have.
Scott
1997 225 Explorer

January 14, 2010, 05:45:38 AM
Reply #3

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: 215 Explorer. Draft question
« Reply #3 on: January 14, 2010, 05:45:38 AM »
The 1997 catalog list the draft for the 215 Ex as 33" with motor down (pg 12)
As CD stated above, no mention (as in past brochures) of draft with motor tilted up.

CH's draft comes straight from the same catalog, next page over (pg 10)

Misprint or just a weight challenged hull design. :scratch:
If you're lookin' to do some bone fishing, I would suggest a FB. :idea:

Not that it matters but I like the 225 model as the best proportioned of the EX series (Gen II 1995-2005).

210 and 230s (Gen II 1991-1993s) look good also :wink:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal