Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: Wiring harness for 1980  (Read 842 times)

January 31, 2008, 08:15:53 AM
Read 842 times

bubba

  • Information Offline
  • Posts: 18
Wiring harness for 1980
« on: January 31, 2008, 08:15:53 AM »
Does anybody know, where i can buy a wiring harness for a 1980 22'2 family fisherman i/o? Looking to replace from the dash to the motor. Wasn't sure if they would still sell something like this, or if i would have to buy a universal kit.
                                Thanks
Logged
January 31, 2008, 09:22:00 AM
Reply #1

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #1 on: January 31, 2008, 09:22:00 AM »
I think you will find there are no kits or harnesses available.  That's going to be a wire by wire project.
Logged
Politics have no relation to morals.
Niccolo Machiavelli
January 31, 2008, 04:41:49 PM
Reply #2

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Wiring harness
« Reply #2 on: January 31, 2008, 04:41:49 PM »
From what I've seen, the factory job was basically a hand wire situation.  AS boats I've seen don't look like harness work.   :roll:

See ya on the water!
Logged
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209

February 01, 2008, 07:54:25 AM
Reply #3

bubba

  • Information Offline
  • Posts: 18
(No subject)
« Reply #3 on: February 01, 2008, 07:54:25 AM »
Thanks for the info guys. Guess i'll be saving that project for next off season.
Logged
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal