Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: Seastar or Baystar?  (Read 1229 times)

September 28, 2007, 09:47:20 AM
Read 1229 times

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
Seastar or Baystar?
« on: September 28, 2007, 09:47:20 AM »
Question for you guys... as most of you may know, I have a 150 Suzu for my 222.  Wondering whether I should use a baystar steering system, or a seastar?  I have always had seastars, but curious as to whether there as any difference other than motor ratings?
Logged
September 28, 2007, 10:00:51 PM
Reply #1

Capt. Rick

  • Information Offline
  • Master Rebuilder
  • Posts: 34
    • http://ospreyguides.com
(No subject)
« Reply #1 on: September 28, 2007, 10:00:51 PM »
You may want to check out a uflex system,  thats what I went with.  Have a sea star on the other boat.  The uflex looks to be built better.
Logged
September 29, 2007, 07:01:27 AM
Reply #2

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
(No subject)
« Reply #2 on: September 29, 2007, 07:01:27 AM »
I have Seastar on both of mine.  I bought it used when I put the 115 on the 170 - maybe a little over kill for the 115 but it's sure easy to turn. :D
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
September 29, 2007, 11:41:02 AM
Reply #3

Undertow2

  • Information Offline
  • Posts: 127
(No subject)
« Reply #3 on: September 29, 2007, 11:41:02 AM »
It is my understanding that you would want to use the Seastar.
Logged
October 01, 2007, 02:07:52 PM
Reply #4

Ben87

  • Information Offline
  • Posts: 213
(No subject)
« Reply #4 on: October 01, 2007, 02:07:52 PM »
I have a Baystar on the 222 with a 2006 150 OptiMax, works just fine and it says that it can be used for motors up to 150 hp.  If it were me I'd save the money, it is the 2nd season now with it and no issues.
Logged
October 03, 2007, 08:41:52 PM
Reply #5

gmcjohnny

  • Information Offline
  • Posts: 12
(No subject)
« Reply #5 on: October 03, 2007, 08:41:52 PM »
hey guys just put a uflex system on my 246xf the only reason i did uflex its built the same if not better an about 200 cheaper i work on boats for a living an the funny thing is the uflex hoses fit my sea star ram on the motor so now when i'm rebuilding my 95 200hp johnrude it gets the new ram
Logged
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal