Hydraulic hose for tilt/trim down

[luv2flycessna]

Hello Everyone need a little help. i just bought a 1974 AquaSport 19-6 with a 1984 150hp mercury blackmax. My trim down Hose has a leak at the point where it goes from metal to rubber hose at the back of the engine. Any ideas where to get a new one from? Thanx for any help.

[JimCt]

Maybe try NAPA. Take the old one in and see what they can do for you. They can make up all sorts of hoses... unless it's a special Mercury hose config.

[RebelYell]

..

The expensive ( but effective ) route:

http://www.mercurypartsexpress.com

 

[GoneFission]

Trim down hose on an '86 Black Max at the back of the engine?  Are you sure about that?  Maybe a picture would help, but that just does not sound quite right...
 

[luv2flycessna]

sorry not really i guess the back of the engine is at the transom mount where it comes from the transom over the engine mount on the transom i put a hose clamp on it and so far is good. It split where the compression part is. thanx for any info so far.