Attention: Have 2 pages to see today

Author Topic: Osprey 205 T-Top  (Read 367 times)

August 16, 2020, 11:51:49 AM
Read 367 times

captainjohn1

  • Information Offline
  • Posts: 2
Osprey 205 T-Top
« on: August 16, 2020, 11:51:49 AM »
I just bought a 2004 Osprey 205.  I'd like to put in a T-Top.  Has anyone done so with an aftermarket T-Top?  Looking at the Fishmaster folding top.  Not sure how sturdy these are?  Not sure where the upright screws will go into the floor...seem close to fuel tank! Has anyone got any ideas/recommendations on a T-Top for this Boat?

October 16, 2020, 10:23:19 AM
Reply #1

Pmulhol

  • Information Offline
  • Posts: 1
Re: Osprey 205 T-Top
« Reply #1 on: October 16, 2020, 10:23:19 AM »
I got a couple quotes when we put an aftermarket T Top on my 205 osprey. I went with Bluewater Welding https://bluewaterwelding.com/ and everything turned out well.

You shouldn't have any issues with a local fabricator.

October 19, 2020, 01:00:15 PM
Reply #2

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: Osprey 205 T-Top
« Reply #2 on: October 19, 2020, 01:00:15 PM »
I just bought a 2004 Osprey 205.  I'd like to put in a T-Top.  Has anyone done so with an aftermarket T-Top?  Looking at the Fishmaster folding top.  Not sure how sturdy these are?  Not sure where the upright screws will go into the floor...seem close to fuel tank! Has anyone got any ideas/recommendations on a T-Top for this Boat?

I have the Fishmaster on my CCP.  The mounts are somewhat adjustable, and mine are on the outboard edges of the console - no issues with the fuel tank.  Overall very happy with it, but you need to secure the stand-offs to the console and you may need reinforcement inside the console if the fiberglass is too flexible.  There is a pic of my boat on the Fishmaster web site - look under the Aquasport section. 
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


 


SimplePortal 2.3.5 © 2008-2012, SimplePortal