Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Generic Aquasport Rebuilding Topics
/
repowering my osprey 200
You reached the limit of pages to see for today
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: repowering my osprey 200 (Read 1298 times)
May 14, 2019, 09:17:00 PM
Read 1298 times
Nick196
Information
Posts:
3
repowering my osprey 200
«
on:
May 14, 2019, 09:17:00 PM »
I am looking into repowering my 1989 osprey 200 was thinking an etec I have mercy 115 tower of power I would like to put a 150 on back was wondering if anyone has done this. The 150 etc weighs 418 which is about the 20 pounds more than a 175 hp from 1989. Was just wondering if anyone had put a etec 150 on the back of there boat
Logged
May 15, 2019, 10:40:19 AM
Reply #1
wingtime
Information
Posts:
3581
Re: repowering my osprey 200
«
Reply #1 on:
May 15, 2019, 10:40:19 AM »
I have a different hull but I repowered with an Etec. Love it. Super quiet. Sips the fuel, uses very little oil, no smoke, instantly starts. tons of torque. Others on here have repowered with Etecs and I think you will find they all are very happy with them. The 20lbs is not much to worry about and can be easily made up for by moving some weight around up under the console. If your electronics are N2K make sure you get the cable to tie the Etec into the N2K network or get the I-command gauge.
Logged
1998 Explorer w/ Etec 250
1987 170 w/ Evinrude 90
May 15, 2019, 04:46:57 PM
Reply #2
Nick196
Information
Posts:
3
Re: repowering my osprey 200
«
Reply #2 on:
May 15, 2019, 04:46:57 PM »
thanks good to here that the etec is quite that was of the questions that I had I don't know what thouse electronics are but I will look into them before I purchase new ones
Logged
May 24, 2019, 02:16:39 PM
Reply #3
Bencarpenter112
Information
Posts:
32
Re: repowering my osprey 200
«
Reply #3 on:
May 24, 2019, 02:16:39 PM »
I raised the floor in my 200 osprey 4 inches closed the transom and hung a zuke 150. If I hadn't closed the transom there would have been some serious swamping issues. Go lighter with a 135 merc or etec could be an option as well. Cant remember exact weight on the zuke 150 but it is on the heavier side for the boat
Logged
1988 Aquasport Osprey 200
1987 Mako 17 (Sold)
1996 Palm Beach 18 Skiff (Sold)
May 31, 2019, 10:45:02 AM
Reply #4
wingtime
Information
Posts:
3581
Re: repowering my osprey 200
«
Reply #4 on:
May 31, 2019, 10:45:02 AM »
yeah the four strokes are heavy for these boats. Remember the basic design goes way back and they originally had 75-100 hp on them. One member had a 90hp Tohotsu on his 19'6 and it pushed it ok. He repowered with a 115 Etec I think. Gobs more power and he loved it. The Merc 150 four stroke is probably the lightest four stroke. Blue Agave has one on his 19-6 but his boat is heavily modified. Maybe 20 pounds heavier than his old two stroke 200 merc. on my 245 Explorer I went from a 225 Johnson V6 to the 250 Etec with very little weight change....
Logged
1998 Explorer w/ Etec 250
1987 170 w/ Evinrude 90
June 04, 2019, 08:03:57 AM
Reply #5
neero
Information
Posts:
1
Re: repowering my osprey 200
«
Reply #5 on:
June 04, 2019, 08:03:57 AM »
I just recently purchased a 95 osprey 200 & repowered with a Suzuki 150 and have had no issues.
Logged
March 13, 2020, 02:04:06 PM
Reply #6
arndtb33
Information
Posts:
12
Re: repowering my osprey 200
«
Reply #6 on:
March 13, 2020, 02:04:06 PM »
hey i love to see some pics of your boat i have the same and would love to repower with new suzuki 150
robert
Logged
March 17, 2020, 12:03:01 PM
Reply #7
arndtb33
Information
Posts:
12
Re: repowering my osprey 200
«
Reply #7 on:
March 17, 2020, 12:03:01 PM »
dido me too pictures i run a mercury 115 4 stroke but would love 150 suzuki i think it is the perfect motor for the boat
i have 1985 200 osprey
bob
Logged
March 18, 2020, 02:06:32 PM
Reply #8
CTsalt12
Information
Posts:
413
Re: repowering my osprey 200
«
Reply #8 on:
March 18, 2020, 02:06:32 PM »
Found a very good deal on a used Zuke 140, 500 hours good compression etc, guy even offered to install. if anyone is interested I can send
Logged
Jimbo
1989 175 Osprey
March 19, 2020, 10:26:07 AM
Reply #9
McAllgeyver
Information
Posts:
108
Re: repowering my osprey 200
«
Reply #9 on:
March 19, 2020, 10:26:07 AM »
yes. Interested! Send info!
Logged
Sean A.
1975 Banana River Skiff - rebuilt - SOLD
1973 19-6 Osprey - rebuilt
March 19, 2020, 11:20:22 AM
Reply #10
CTsalt12
Information
Posts:
413
Re: repowering my osprey 200
«
Reply #10 on:
March 19, 2020, 11:20:22 AM »
happy to help out some fellow AS owners
https://m.facebook.com/?_rdr#!/story/graphql_permalink/?graphql_id=UzpfSTEwMDAwMDQxNzU5NTY1MzpWSzoyOTI4MTczODMzODg4MDIy
Logged
Jimbo
1989 175 Osprey
March 19, 2020, 01:12:27 PM
Reply #11
McAllgeyver
Information
Posts:
108
Re: repowering my osprey 200
«
Reply #11 on:
March 19, 2020, 01:12:27 PM »
Page Not Found! Maybe its gone already. Crap
Logged
Sean A.
1975 Banana River Skiff - rebuilt - SOLD
1973 19-6 Osprey - rebuilt
March 19, 2020, 01:48:27 PM
Reply #12
CTsalt12
Information
Posts:
413
Re: repowering my osprey 200
«
Reply #12 on:
March 19, 2020, 01:48:27 PM »
Its still available, Stuart FL. Not sure why link isn't working. Just checked It on my phone. If you're interested I can send via email or whatever, PM me.
Logged
Jimbo
1989 175 Osprey
March 19, 2020, 01:56:31 PM
Reply #13
McAllgeyver
Information
Posts:
108
Re: repowering my osprey 200
«
Reply #13 on:
March 19, 2020, 01:56:31 PM »
got it. 2011 model, i found it on Facebook in Stuart Fl. 20"...Not long enough. Thats what she said
Thanks for looking out for us all.
Logged
Sean A.
1975 Banana River Skiff - rebuilt - SOLD
1973 19-6 Osprey - rebuilt
Print
Pages:
1
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Generic Aquasport Rebuilding Topics
/
repowering my osprey 200
SimplePortal 2.3.5 © 2008-2012, SimplePortal