Author Topic: I am looking for the sleeves that go into the rod holders in the gunnels (Read 1437 times)

ashefrin · « **on:** July 24, 2017, 04:49:03 PM »

I have a 19 osprey and in the gunnels there are holes for the fishing rods. the insert or sleeve has come out and is gone any idea how I can get replaements here is a picture of one

SteelHead · « **Reply #1 on:** July 24, 2017, 10:13:40 PM »

Ash, I have the same dilemma . I saw a while ago while browsing through some of the old rebuild threads there was a lengthy discussion on this very subject .perhaps Capt. Bob or RicKK can steer you in the right direction . I believe they are not available . I thought about bonding some PVC pipe together and then milling it down to size on my Harbor Freight wood lathe . Just Saying !

Capt. Bob · « **Reply #2 on:** July 24, 2017, 10:22:57 PM »

Can you show me a pic of where the sleeve is located?

Thanks.

ashefrin · « **Reply #3 on:** July 25, 2017, 08:16:54 AM »

Capt,

Thanks for answering here are a few pics 1 with no sleeve and 1 with they are on the sides I have a 19 Osprey any help would be appreciated....Andy

ashefrin · « **Reply #4 on:** July 25, 2017, 08:19:21 AM »

without Thanks again...Andy

GoneFission · « **Reply #5 on:** July 25, 2017, 09:02:56 AM »

You can cut some PVC pipe and glue it in place with some 5200 to replace the "sleeves"

mshugg · « **Reply #6 on:** July 25, 2017, 11:11:11 AM »

Th marine has rod tubes in their catalog. Here's a link: http://thmarine.com/custom-rod-tubes

Basically just pvc with a flange.

Capt. Bob · « **Reply #7 on:** July 25, 2017, 01:34:23 PM »

You're looking for a rod grommet

Here ya go.
http://classicaquasport.com/smf/index.php?topic=9671.msg83927#msg83927

Where to buy.
http://www.marineeast.com/a_sch/sch_det.asp?cid=06&pid=06_06

Good luck.

Alan_Tampa · « **Reply #8 on:** July 26, 2017, 03:07:16 PM »

This post helped me too! Thanks, have been looking for these for a while!

RickK · « **Reply #9 on:** July 26, 2017, 08:38:33 PM »

Welcome back home Capt Bob - glad a bear didn't have some fun with you on the adventure you were on.

Immediately he's helping the membership again as usual

Capt. Bob · « **Reply #10 on:** July 26, 2017, 08:41:38 PM »

Good to be back.
Oh and it was moose and lobster that were threatening. Didn't see any live moose but ate a lot of lobster.

Shavrfillet · « **Reply #11 on:** July 30, 2017, 08:17:05 AM »

These sleeves are exactly what I'm looking for, but I seem to not be able to find them for my 1987 250CCP.
The rod holes on my 250 are 3" and outer dimension should be 4". I would love to find these babies in White, preferably with no screw holes. I would 5200 them on. Any help would be appreciated !!

Capt. Bob · « **Reply #12 on:** July 30, 2017, 02:02:00 PM »

The rod trim rings I used (and linked to) measure 3 1/2" outside to outside. Doesn't leave a lot of bonding area on your case. Mine however fit snug inside the existing cutout.
I would call them and ask if one of these rings has the dims. you require. They were very helpful in selecting a size that fit my 91 WAC.

Good luck.

Shavrfillet · « **Reply #13 on:** July 30, 2017, 02:53:22 PM »

Thank you Cap. Bob, I'll call them tomorrow .

ashefrin · « **Reply #14 on:** August 07, 2017, 02:12:04 PM »

I was able to find someone with a 3d printer and had the old one scanned and made new ones they came out pretty good picture attached

Author Topic: I am looking for the sleeves that go into the rod holders in the gunnels (Read 1437 times)

ashefrin

I am looking for the sleeves that go into the rod holders in the gunnels

SteelHead

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Capt. Bob

Re: I am looking for the sleeves that go into the rod holders in the gunnels

ashefrin

Re: I am looking for the sleeves that go into the rod holders in the gunnels

ashefrin

Re: I am looking for the sleeves that go into the rod holders in the gunnels

GoneFission

Re: I am looking for the sleeves that go into the rod holders in the gunnels

mshugg

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Capt. Bob

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Alan_Tampa

Re: I am looking for the sleeves that go into the rod holders in the gunnels

RickK

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Capt. Bob

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Shavrfillet

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Capt. Bob

Re: I am looking for the sleeves that go into the rod holders in the gunnels

Shavrfillet

Re: I am looking for the sleeves that go into the rod holders in the gunnels

ashefrin

Re: I am looking for the sleeves that go into the rod holders in the gunnels