Author Topic: Coffin deck lifting (Read 842 times)

djbinding · « **on:** June 09, 2016, 01:14:18 PM »

Replaced plywood under coffin hatch last year. Few spots are lifting. Looking for advice to either inject adhesive or sand down to wood and regelcoat. Gonna put down kiwigrip nonskid when done do appearance isn't an issue. Don't want to pull the coffin hatch again.

djbinding · « **Reply #1 on:** April 28, 2017, 03:05:51 PM »

Anybody got any advice. gonna attempt to repair this week

RickK · « **Reply #2 on:** April 28, 2017, 08:40:04 PM »

Hi DJ, so you re-cored the hatch? What is delaminating? You mentioned lifting - is that the coring on the bottom? Any pics? We can help you more with pics. As they say, a pic is worth a thousand words....

djbinding · « **Reply #3 on:** May 24, 2017, 08:26:42 AM »

The gel coat lifting. Hatch was recorded. Trying to avoid a whole lot if sanding. Somewhere there's a post about drilling holes and injecting resin. Might try that rout and see how it holds.

Capt. Bob · « **Reply #4 on:** May 24, 2017, 09:30:48 AM »

Light reading.

http://classicaquasport.com/smf/index.php?topic=10525.0

http://classicaquasport.com/smf/index.php?topic=14122.msg140281#msg140281

Non - Forum Video.

https://www.youtube.com/watch?v=tBGKiZquNWk

Good luck.

djbinding · « **Reply #5 on:** May 24, 2017, 04:22:25 PM »

Thanks Bob. Those were the posts i was looking for.

I'm gonna try using this stuff. Less prep. Not too pricey

https://www.youtube.com/watch?v=-EpafK3Hzyw

Author Topic: Coffin deck lifting (Read 842 times)

djbinding

Coffin deck lifting

djbinding

Re: Coffin deck lifting

RickK

Re: Coffin deck lifting

djbinding

Re: Coffin deck lifting

Capt. Bob

Re: Coffin deck lifting

djbinding

Re: Coffin deck lifting