Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Center Console Professional (CCP) Rebuilds
/
Original Location of Bow Eye on CCP
Attention: Have 2 pages to see today
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: Original Location of Bow Eye on CCP (Read 905 times)
October 18, 2016, 07:21:54 AM
Read 905 times
mshugg
Information
Master Rebuilder
Posts:
951
Original Location of Bow Eye on CCP
«
on:
October 18, 2016, 07:21:54 AM »
My 20 CCP had multiple bow eyes and evidence of many improvised repairs. I'm getting close in my rebuild to a point where I need to locate mine. Could you CCP owners please tell me the original bow eye location? Are they above or below the point where the lines formed my the chines come together at the bow. Thanks for any help.
Logged
October 18, 2016, 08:21:40 AM
Reply #1
Capt. Bob
Information
Global Moderator
Posts:
6446
Re: Original Location of Bow Eye on CCP
«
Reply #1 on:
October 18, 2016, 08:21:40 AM »
Back when long time member JD had a 200 CCP. Original as far as I remember at this point. Note bow eye location.
His 222 Location is same. Again original.
Not sure if the 200 had a bow lifting ring but on the 222 that lift ring is connected with threaded rod to the bow eye.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
October 18, 2016, 08:42:46 AM
Reply #2
Capt. Bob
Information
Global Moderator
Posts:
6446
Re: Original Location of Bow Eye on CCP
«
Reply #2 on:
October 18, 2016, 08:42:46 AM »
You do have a lifting ring. That should indicate original (factory) location.
Would you not use that?
Good luck.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
October 18, 2016, 04:11:30 PM
Reply #3
mshugg
Information
Master Rebuilder
Posts:
951
Re: Original Location of Bow Eye on CCP
«
Reply #3 on:
October 18, 2016, 04:11:30 PM »
Thanks, Capt Bob. I can see from the pictures that it is just above the pt where the Chines meet. The threaded rod on my lifting ring was no longer plumb which made me doubt its location. I've got enough info to proceed now.
Logged
Print
Pages:
1
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Center Console Professional (CCP) Rebuilds
/
Original Location of Bow Eye on CCP
SimplePortal 2.3.5 © 2008-2012, SimplePortal