Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: cupholders  (Read 1712 times)

July 29, 2010, 06:07:50 PM
Read 1712 times

plumme03

  • Information Offline
  • Posts: 6
cupholders
« on: July 29, 2010, 06:07:50 PM »
I have a 2002 215 Explorer that I need to replace the cupholder / storage box that is mounted on the bulkhead beside the captains seat. Does anyone know if aquasport molded these or did they outsource them. I've tried to find them ,but keep hitting dead ends
Thanks
Logged
July 29, 2010, 07:24:12 PM
Reply #1

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: cupholders
« Reply #1 on: July 29, 2010, 07:24:12 PM »
Can't remember exactly, but does anything here look familiar?
http://paragonplastics.net/index.php?option=com_content&task=view&id=22&Itemid=47
Logged


Corner of 520 and A1A...
July 30, 2010, 07:37:28 AM
Reply #2

plumme03

  • Information Offline
  • Posts: 6
Re: cupholders
« Reply #2 on: July 30, 2010, 07:37:28 AM »
None of those pictured are what I have,the ones that are in my boat are approximately 18 x12 with a seperate molded plastic copholder that is screwed to the housing. Thanks for your help.
Logged
July 30, 2010, 11:14:45 AM
Reply #3

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: cupholders
« Reply #3 on: July 30, 2010, 11:14:45 AM »
plumme,
Can you post a pic?  That might jar my brain a bit...
Logged


Corner of 520 and A1A...
August 11, 2010, 08:08:27 PM
Reply #4

plumme03

  • Information Offline
  • Posts: 6
Re: cupholders
« Reply #4 on: August 11, 2010, 08:08:27 PM »
Logged
August 11, 2010, 08:23:27 PM
Reply #5

slvrlng

  • Information Offline
  • Posts: 1817
Re: cupholders
« Reply #5 on: August 11, 2010, 08:23:27 PM »
There is a guy on CM making cupholders and binoc holders out of starboard. They look really nice, he uses a CNC machine.
Logged
Lewis
       1983 222 Osprey "Slipaway"
       1973 19-6 "Emily Lynn"
      
July 25, 2016, 02:08:51 PM
Reply #6

ShawnsIronman

  • Information Offline
  • Posts: 29
Re: cupholders
« Reply #6 on: July 25, 2016, 02:08:51 PM »
I am going to bump this thread since I am not sure if anyone updated an answer, and I am looking for one.

Yesterday someone's big cup broke one of my inserts that had a cubby for stuff and a cup holder. There was crack in it, so it did not take much for them to break it completely out. I am not by my boat to take a picture, so I found a picture from a video from it's sister vessel the Wellcraft 210 coastal. Does anyone know where I can purchase a replacement plastic piece? See attached photo.
Logged
July 25, 2016, 05:27:24 PM
Reply #7

ShawnsIronman

  • Information Offline
  • Posts: 29
Re: cupholders
« Reply #7 on: July 25, 2016, 05:27:24 PM »
The insert is 12"x20" and about 5 inches deep at the bottom but tapers on the top.
Logged
July 26, 2016, 02:06:54 AM
Reply #8

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: cupholders
« Reply #8 on: July 26, 2016, 02:06:54 AM »
I found these (or at least 1) and posted the link in another thread. I'm nowhere near my computer so I can't  find it now.
I'll  be back this weekend. The vendor/seller had either a left or right one but not both. My response to the member was to buy the one theyhad and then have it reproduced.
This wasn't that long ago. I believe it was for a 215 EX. The thread is somewhere on this Forum.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
July 26, 2016, 04:10:40 PM
Reply #9

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: cupholders
« Reply #9 on: July 26, 2016, 04:10:40 PM »
See other thread on this same thing.

Looks like spmeone bought the ebay one I was referring to.

Good luck.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal