Thank you for contacting us at
SeaStar Solutions / Teleflex Marine technical support
Your questions and concerns are important to us.
For more in depth information on all of our products
Please use our web site at
http://www.seastarsolutions.com/Thanks again
Jim Corday
________________________________________
From: Adams, Marc
Sent: Friday, March 22, 2013 3:37 PM
To: Corday, Jim; awashatlowtide@gmail.com
Subject: RE: Adding a second station to a boat
Not a problem adding a second station to a SeaStar system, I recommend that the following parts are ordered
• HH5271, helm pump, 1 ea
• HF5501, add a station fitting kit, 1 ea
• HO51xx, Steering hoses, 1 ea
• HA5430, Oil, 1 ea
Thanks
Marc
Marc D. Adams
Technical Support
SeaStar Solutions'
3831 No. 6 Road
Richmond, BC, V6V 1P6
Phone: 604-248-3858
Fax: 604-279-2202
This e-mail and any attachments may contain confidential and privileged information. If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail and destroy any copies. Any dissemination or use of this information by a person other than the intended recipient is unauthorized and may be illegal.
________________________________________
From: Corday, Jim
Sent: Friday, March 22, 2013 12:34 PM
To: awashatlowtide@gmail.com; Adams, Marc
Subject: Adding a second station to a boat
There is a boater adding a second steering station to his boat and he has hydraulic steering now with the 1.7 helm and was told he could not use that in a dual station boat with a Mercury Outboard.
_____________________________________________________________________________________________________________
For the controls section the MT-3 can be used in a dual station boat as long as you also use the DS unit.
You can reuse the older style Mercury control (Not Gen II) but you can not use the Mercury style (600A) control cables.
You will use the CCX633xx control cables for every thing.
At the engine end you will use CA27319P for the Mercury stern drives and outboards. Inboard that kit would be CA27373P
At the Mercury control end you will need to use this adapter kit 301074.
All of those kits will do both the throttle and the shift cable.
Below is our catalog pages on the DS unit. There is one page for outboards and the other page covers both inboards and stern drives.
http://www.seastarsolutions.com/products/controls-and-cables/mechanical-dual-action/ds-unit-international-only/http://www.seastarsolutions.com/wp-content/uploads/2010/04/mcda7-DS_Unit.pdfThank you for contacting us at
SeaStar Solutions / Teleflex Marine technical support
Your questions and concerns are important to us.
For more in depth information on all of our products
Please use our web site at
http://www.seastarsolutions.com/Thanks again
Jim Corday
We have recently changed our email addresses. My new address is Jim.Corday@seastarsolutions.com. Please update your records. Thank you