Attention: Have only 1 page to see today

Author Topic: Blue Sea ACR install and wiring clean-up  (Read 805 times)

June 13, 2015, 06:12:44 PM
Read 805 times

vonkamp

  • Information Offline
  • Posts: 44
Blue Sea ACR install and wiring clean-up
« on: June 13, 2015, 06:12:44 PM »
Just finished up installing the ACR system. Blue Sea makes some quality stuff. Wiring replaced as well. Still looks like a mess but at least it's my mess...  :character0029:

[/img]




June 13, 2015, 08:08:50 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
Re: Blue Sea ACR install and wiring clean-up
« Reply #1 on: June 13, 2015, 08:08:50 PM »
Looks good from here :thumright:
And you're right, Blue Seas does make good stuff.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

June 15, 2015, 08:55:46 AM
Reply #2

Shine

  • Information Offline
  • Posts: 276
    • http://www.gulfstreamcoposites.com
Re: Blue Sea ACR install and wiring clean-up
« Reply #2 on: June 15, 2015, 08:55:46 AM »
those are one of the best things to happen to small boating in the last 10 years!  You do need to mount them in a place they will not be exposed to a lot of salt.  Last week on a far offshore trip on my friends boat, we lost radar them bottom machine, then GPS (80 miles out).  Turns out the ACR had corroded on the backside and crapped out - no charge to house batteries.  We bypassed the ACR and continued, but if it were not for the flat sea conditions, it would have been very difficult to get house system back up and running.

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal