Attention: Have 2 pages to see today

Author Topic: 245 Explorer Battery Shelf Failure  (Read 902 times)

December 18, 2014, 11:13:22 AM
Reply #15

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: 245 Explorer Battery Shelf Failure
« Reply #15 on: December 18, 2014, 11:13:22 AM »
I'll try to remember to snap a pic of my battery shelf.

For the battery management question I swapped out my battery switch for a Blue Seas Automatic Charging Relay (ACR).  This is the kit I installed:
https://www.bluesea.com/products/7649/Mini_Add-A-Battery_Kit_-_65A

The beauty of this set up is I don't have to worry about battery management anymore.  My house battery and starting battery are isolated from each other.  Not only do I not have to worry about killing my starting battery, my electronics don't see a voltage spike or drop when I start my engine. In the off chance I run a battery down, I have the option of combining the batteries by simply switching the switch to the combine position.  

For you question as to the type of batteries I'm running.  I was running two dual purpose group 27s.  My house battery just died so I replaced it with a dedicated deep cycle battery.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal