Attention: Have only 1 page to see today

Author Topic: Bezel for BayStar Steering System Conversion  (Read 692 times)

June 27, 2014, 09:51:54 AM
Read 692 times

daniel123

  • Information Offline
  • Posts: 381
Bezel for BayStar Steering System Conversion
« on: June 27, 2014, 09:51:54 AM »
Word has it here that I may need some sort of a bezel to cover up holes on my 1998 Osprey 200's helm when I switch to a BayStar steering system. My contact at Teleflex/BayStar says he is not familiar with what I need and is not sure something like that is required. Can anyone offer some insight?

July 01, 2014, 11:39:35 AM
Reply #1

daniel123

  • Information Offline
  • Posts: 381
Re: Bezel for BayStar Steering System Conversion
« Reply #1 on: July 01, 2014, 11:39:35 AM »
I guess no one has any advice on the bezel matter. THAT's a first! But thanks for the 22 who read this post and considered the question.

July 01, 2014, 11:47:53 AM
Reply #2

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Bezel for BayStar Steering System Conversion
« Reply #2 on: July 01, 2014, 11:47:53 AM »
As far as I know there is a bezel for just that.  Seabob is the authority on that.... he probably remembers the part number!
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

July 01, 2014, 12:01:43 PM
Reply #3

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Bezel for BayStar Steering System Conversion
« Reply #3 on: July 01, 2014, 12:01:43 PM »
Almost Bruce...

Teleflex HA5418 bezel kit is what you need Daniel...http://www.ebay.com/itm/Teleflex-HA5418 ... 1244473888

I believe Worst sells them...and be patient, dude!  Just because 22 people have looked at the post, doesn't mean those 22 have the info you're looking for...


Corner of 520 and A1A...

July 01, 2014, 12:09:01 PM
Reply #4

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: Bezel for BayStar Steering System Conversion
« Reply #4 on: July 01, 2014, 12:09:01 PM »
Wait a minute.
This was brought up before....by you Dan....and answered (I'm guessing cause I don't know myself)...... with a part #......by...you guessed it....... SB. :mrgreen:

How about this.
viewtopic.php?p=121463#p121463

Please note this was discussed awhile back (May 2014) so I see how it could have slipped everyone's (yours included) mind. :mrgreen:

Good luck.

Well you beat me to it SB....still.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

July 01, 2014, 12:36:44 PM
Reply #5

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Bezel for BayStar Steering System Conversion
« Reply #5 on: July 01, 2014, 12:36:44 PM »
I thought this subject sounded familiar!   :mrgreen:
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

July 01, 2014, 12:40:24 PM
Reply #6

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Bezel for BayStar Steering System Conversion
« Reply #6 on: July 01, 2014, 12:40:24 PM »
In the infamous words of the sage himself, Yogi Berra, "Deja Vu all over again..."


Corner of 520 and A1A...

July 01, 2014, 04:08:12 PM
Reply #7

Aswaff400

  • Information Offline
  • Master Rebuilder
  • Posts: 1627
Re: Bezel for BayStar Steering System Conversion
« Reply #7 on: July 01, 2014, 04:08:12 PM »
well all yall beat me to it,

http://www.foreandaftmarine.com/1-HA5418.htm

as bob said, part number 1-HA5418 is what i show in my catalog
Aaron
1996 200 Osprey SOLD
1968 22-2 Flatback SOLD
1993 210 Explorer SOLD
1991 Fountain 31TE SOLD
1989 Fountain 12-meter SOLD
1992 Talon F-20 SOLD
2021 Fountain 38TE QUAD 400's

July 02, 2014, 03:48:53 PM
Reply #8

daniel123

  • Information Offline
  • Posts: 381
Re: Bezel for BayStar Steering System Conversion
« Reply #8 on: July 02, 2014, 03:48:53 PM »
Duh. And I thought the worst part of turning 60 (last week) was forgetting where I put my car keys....Thanks, guys.

Dan

July 08, 2014, 09:27:04 AM
Reply #9

daniel123

  • Information Offline
  • Posts: 381
Re: Bezel for BayStar Steering System Conversion
« Reply #9 on: July 08, 2014, 09:27:04 AM »
Bezel on it's way from Teleflex -- thanks to you guys providing me with the part #...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal