Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: 170 stern mounted livewell ????  (Read 514 times)

April 22, 2014, 11:11:13 PM
Read 514 times

Capt.Dave

  • Information Offline
  • Posts: 8
170 stern mounted livewell ????
« on: April 22, 2014, 11:11:13 PM »
Does anyone know how the stern mounted livewells were attached. Bolted ,glassed ????
Logged
April 22, 2014, 11:15:21 PM
Reply #1

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: 170 stern mounted livewell ????
« Reply #1 on: April 22, 2014, 11:15:21 PM »
Bolted on.
Logged
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90
April 22, 2014, 11:20:59 PM
Reply #2

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 170 stern mounted livewell ????
« Reply #2 on: April 22, 2014, 11:20:59 PM »
There were four holes per each external livewell. Through-bolted on the lower two holes into the bilge. Lag-screwed into the transom on the upper two, so as not to interfere/intrude the deck.
Logged
April 22, 2014, 11:23:26 PM
Reply #3

Capt.Dave

  • Information Offline
  • Posts: 8
Re: 170 stern mounted livewell ????
« Reply #3 on: April 22, 2014, 11:23:26 PM »
That would make installing them now a pain without cutting in some inspection hatches...........lol
Logged
April 22, 2014, 11:55:18 PM
Reply #4

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 170 stern mounted livewell ????
« Reply #4 on: April 22, 2014, 11:55:18 PM »
Quote from: "Capt.Dave"
That would make installing them now a pain without cutting in some inspection hatches...........lol

Not a biggee. Go ahead and cut the deck near the transom, between the stringers, and install a single good-sized, quality hatch.

Put an automatic bilge pump in there too :thumright:
Logged
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal