Outboard install is off and running! Video and GPS reading!

[Aswaff400]

Marc, twin 150s really were an excellent match for the 245/250 Osprey or Explorer.  I swear, the last year and 1/2 I was building them, 2 out of 3 245/250s were twins..Yam, Merc, or OMC...

but you hardly see any twins on the market.... thats why i was all over the one in our marina but the guy wouldnt budge...  :cry:

[wingtime]

Yeah I doubt I'll ever get rid of my 245. I'll just end up repowering her down the road with either a BIG single or twins. Then maybe spend some money fixing her up now and then.

[seabob4]

Aaron, a lot of those 245s and 250s headed up N to the Chesapeake and Jersey areas, and a whole lot more to S FL, Miami and Lauderdale...

[icemanbryan]

Aaron, a lot of those 245s and 250s headed up N to the Chesapeake and Jersey areas, and a whole lot more to S FL, Miami and Lauderdale...

Some to CA.

[icemanbryan]

Well, crazy days here.
Extremely busy w work.
We had a little time this afternoon
Here is a photo of the install

Setting up the electronics


Lewis, check out the numbers

[seabob4]

Well done, Bryan.  Just one, yes, one, teeny tiny gripe.  I would have aligned the rigging hoses so that they were "in sync" with each other.  Like on this twin Yam I did...



But that's just me, I like the look.  Excellent, otherwise!!

[icemanbryan]

Well done, Bryan.  Just one, yes, one, teeny tiny gripe.  I would have aligned the rigging hoses so that they were "in sync" with each other.  Like on this twin Yam I did...



But that's just me, I like the look.  Excellent, otherwise!!

That is so funny, it bothers me to see it this way.
David utilized the existing Yamaha hole.
I think, I would like to have it re drilled and the original hole filled in, yeah?

Also, what do you think about white cable housings?

[seabob4]

NO WHITE!!!  WHITE BAD!!!

Seriously, white just discolors, you'll hate it in a couple years.  Stick with the black, you'll thank me...

[seabob4]

Bryan, you can get the look you want simply by "twisting" around the rigging hose.  Provided the fuel and oil lines inside the hose can take it.

The way I do it is the way I was taught many moons ago by my good friend Tony Fernandez.  Every time I rig a motor, I have him to thank for that...

[icemanbryan]

NO WHITE!!!  WHITE BAD!!!

Seriously, white just discolors, you'll hate it in a couple years.  Stick with the black, you'll thank me...

Black it is