Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: Best deals on glass, resin & epoxy?  (Read 2120 times)

April 19, 2006, 01:27:04 PM
Read 2120 times

JimCt

  • Information Offline
  • Posts: 1848
Best deals on glass, resin & epoxy?
« on: April 19, 2006, 01:27:04 PM »
Any recommendations as to best deals on glass cloth, roving, polyester resin and epoxy?  Any suppliers to avoid?
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 19, 2006, 06:21:25 PM
Reply #1

Deck Daddy

  • Information Offline
  • Posts: 74
(No subject)
« Reply #1 on: April 19, 2006, 06:21:25 PM »
Try Mertons in springfield MA. They have a web page also.
http://www.mertons.com/
Logged
One boat at a time.
April 19, 2006, 08:10:22 PM
Reply #2

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #2 on: April 19, 2006, 08:10:22 PM »
Ask Warthog or he will chime in sooner or later.
Logged
Politics have no relation to morals.
Niccolo Machiavelli
April 19, 2006, 08:22:35 PM
Reply #3

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #3 on: April 19, 2006, 08:22:35 PM »
Will try Merton's site. Maybe take a drive up there to check them out.  I'll also try searching here and on the Mako site to see if warthog has advised on this.  I should have done that before asking...  :oops:

DD, need pix of your Gov't furnished yacht!
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 20, 2006, 06:18:15 AM
Reply #4

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11295
(No subject)
« Reply #4 on: April 20, 2006, 06:18:15 AM »
This place is in my area and I think Wart had this link in his list.  Here, they ship everywhere.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
April 20, 2006, 07:47:39 AM
Reply #5

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #5 on: April 20, 2006, 07:47:39 AM »
Got the link... Thanks Rick!
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 20, 2006, 08:30:38 AM
Reply #6

Seadog

  • Information Offline
  • Posts: 223
(No subject)
« Reply #6 on: April 20, 2006, 08:30:38 AM »
You can also try http://www.fgci.com/ in St. Pete Fla.

But the shipping is going to kill you.
Logged
1970 Aquasport 222
Spring Hill, Fl.
Should spash her in the summer.
Just don\'t know which summer.
April 20, 2006, 08:45:33 AM
Reply #7

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #7 on: April 20, 2006, 08:45:33 AM »
I don't know if you guys have a Boaters World around but right now they are selling polyester resin for $14.95/ga.
Logged
Politics have no relation to morals.
Niccolo Machiavelli
April 20, 2006, 11:19:18 AM
Reply #8

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #8 on: April 20, 2006, 11:19:18 AM »
Think there's one over in Waterford CT.  That price beats others.  Thanks for the tip.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 20, 2006, 11:02:03 PM
Reply #9

Tim/GA

  • Information Offline
  • Posts: 90
    • http://curriecustomnets.com/
(No subject)
« Reply #9 on: April 20, 2006, 11:02:03 PM »
Are you planning on using polyester or epoxy resin?
Logged
Currie Custom Cast Nets and Seines
http]
April 21, 2006, 07:22:09 AM
Reply #10

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #10 on: April 21, 2006, 07:22:09 AM »
Both.  For structurals I'll use epoxy, for minor things I'll use polyester.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal