Attention: Have 2 pages to see today

Author Topic: 240/246 Inboard Rebuild  (Read 4896 times)

November 03, 2011, 12:44:46 PM
Reply #30

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 240/246 Inboard Rebuild
« Reply #30 on: November 03, 2011, 12:44:46 PM »
You got it. I grew up in Middle Sound...live just N of there now. I'll check with some guys and get back to you.

Hang tight 8)

November 03, 2011, 06:30:08 PM
Reply #31

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
Re: 240/246 Inboard Rebuild
« Reply #31 on: November 03, 2011, 06:30:08 PM »
Quote from: "gran398"
I grew up in Middle Sound...
I thought you never grew up  :roll:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 03, 2011, 06:47:51 PM
Reply #32

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: 240/246 Inboard Rebuild
« Reply #32 on: November 03, 2011, 06:47:51 PM »
He has grown older though. :mrgreen:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

November 03, 2011, 09:42:01 PM
Reply #33

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 240/246 Inboard Rebuild
« Reply #33 on: November 03, 2011, 09:42:01 PM »
Quote from: "RickK"
Quote from: "gran398"
I grew up in Middle Sound...
I thought you never grew up  :roll:


Hey Tinkerbell...don't you believe in Peter Pan?

You gotta  believe. If you don't...you'll turn into a pumpkin at midnight :lol:

November 07, 2011, 02:27:48 PM
Reply #34

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 240/246 Inboard Rebuild
« Reply #34 on: November 07, 2011, 02:27:48 PM »
orb,

I have the information.

Yes, his name is Eric R___. He is a mechanical engineer here in town. His boat is four slips north of where I kept a boat a few years back.

Just spoke with him. His shallow water drive system was patented exactly when the boatbuilding  industry tanked. He still holds the patent, but no offers to purchase at present.

Very nice gentleman. He would be pleased to help you. I have pm'd to you his cell #. Mentioned that you would be calling.
Just reference the Wilmington guy from Classic Aquasport.

Hope this is not considered "thread derailment" by the author. Only trying to help a member. Thanks.

November 07, 2011, 05:46:30 PM
Reply #35

Capt Matt

  • Information Offline
  • Master Rebuilder
  • Posts: 791
    • http://www.captmattmitchell.com
Re: 240/246 Inboard Rebuild
« Reply #35 on: November 07, 2011, 05:46:30 PM »
Is the drive a lot different than a Arson surface drive which I have seen on go fast diesel boats?
I know Nor-Tech, which are made in Cape Coral FL makes go fast diesel boats for the military with the drives.
Capt Matt
www.captmattmitchell.com
Light tackle sportfishing

November 08, 2011, 09:59:14 AM
Reply #36

orb

  • Information Offline
  • Posts: 96
Re: 240/246 Inboard Rebuild
« Reply #36 on: November 08, 2011, 09:59:14 AM »
WOw, thanks. I will give him a call. I really appreciate it.
70\'s  240 seahunter(rebuilding now)
Photogallery-
http://www.classicaquasport.com/gallery ... &protype=1

\'77 22-2 (rebuild on hold)
1997 19\' sundance 70 merc

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal