Attention: Have 2 pages to see today

Author Topic: 19.6 died bought a 20.2 to replace it  (Read 488 times)

October 16, 2013, 10:25:21 PM
Read 488 times

Pepper

  • Information Offline
  • Posts: 6
19.6 died bought a 20.2 to replace it
« on: October 16, 2013, 10:25:21 PM »
I have STILL my 19.6, it has some cracks along the stringers and dont have time to do what needs be done on it, so I bought an 82 20.2 can anyone give me any Spec info on it..... and why do I get crazy spray around my cowling Ive raised and lowerd the motor and it still sprays.

Help

October 16, 2013, 10:41:31 PM
Reply #1

Capt Matt

  • Information Offline
  • Master Rebuilder
  • Posts: 791
    • http://www.captmattmitchell.com
Re: 19.6 died bought a 20.2 to replace it
« Reply #1 on: October 16, 2013, 10:41:31 PM »
Motor mounted too low or transducer mounted too low
Capt matt
www.captmattmitchell.com
Light tackle sportfishing

October 17, 2013, 08:55:34 PM
Reply #2

Pepper

  • Information Offline
  • Posts: 6
Re: 19.6 died bought a 20.2 to replace it
« Reply #2 on: October 17, 2013, 08:55:34 PM »
I raised the motor which is a 25in up to the 3rd hole and still get spray. I dont have the transducer mounted yet, and from measuring the transom its 25inches. so my cav plate should be above the waterline. Could it be to high?

November 13, 2013, 09:08:01 PM
Reply #3

Necessary Evil

  • Information Offline
  • Posts: 174
Re: 19.6 died bought a 20.2 to replace it
« Reply #3 on: November 13, 2013, 09:08:01 PM »
I think you will have to observe the cav plate while you are running. Wear your scuba mask :)
1976 22-2
Roll Tide!

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal