You reached the limit of pages to see for today

Author Topic: Through hull fitting  (Read 707 times)

March 08, 2014, 08:27:52 PM
Read 707 times

SDL

  • Information Offline
  • Posts: 7
Through hull fitting
« on: March 08, 2014, 08:27:52 PM »
I have a through hull fitting that seems to go no where...... It is located at the water line, or just below, directly under the breather for the gas tank. Starboard side, 3/4 to the bow..... My question is what is this for?

March 08, 2014, 08:52:45 PM
Reply #1

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Through hull fitting
« Reply #1 on: March 08, 2014, 08:52:45 PM »
Overboard drain for the forward fishbox/compartment...


Corner of 520 and A1A...

March 08, 2014, 10:06:19 PM
Reply #2

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: Through hull fitting
« Reply #2 on: March 08, 2014, 10:06:19 PM »
Ya know, I never saw what model you actually have but assuming it's CCP then SB just answered your question.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

March 08, 2014, 10:19:16 PM
Reply #3

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Through hull fitting
« Reply #3 on: March 08, 2014, 10:19:16 PM »
Sup CB?  SDL PM'd me earlier, I believe we are correct...

Little chilly this eve, but a gorgeous day we did have... :cheers:


Corner of 520 and A1A...

March 08, 2014, 10:26:46 PM
Reply #4

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: Through hull fitting
« Reply #4 on: March 08, 2014, 10:26:46 PM »
Just under the first "S".
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

March 08, 2014, 10:43:13 PM
Reply #5

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Through hull fitting
« Reply #5 on: March 08, 2014, 10:43:13 PM »
Regardless of the model, this location port or starboard will be the forward fish box drain.

To test, put a garden hose in the box and check the flow.

March 08, 2014, 11:47:31 PM
Reply #6

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Through hull fitting
« Reply #6 on: March 08, 2014, 11:47:31 PM »
That doesn't always work Scott! I did that on my 170 it vanished!  LOL  The fish box drain hose came off the fitting on the fish box...  The water was actually just going in to the bilge...  and If I had take the boat out without the plug that the PoO had stuffed into the thru hull...  well my 170 would  have sank!  :shock:
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

March 09, 2014, 10:15:49 AM
Reply #7

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Through hull fitting
« Reply #7 on: March 09, 2014, 10:15:49 AM »
Quote from: "wingtime"
That doesn't always work Scott! I did that on my 170 it vanished!  LOL  The fish box drain hose came off the fitting on the fish box...  The water was actually just going in to the bilge...  and If I had take the boat out without the plug that the PoO had stuffed into the thru hull...  well my 170 would  have sank!  :shock:

Yep I know, that's the reason for the test :mrgreen:

Should have mentioned, put the garden hose in the fishbox with the boat ON THE TRAILER :salut:

The 19-6 gas hose install I just helped with....the fishbox drain hose was loose in the bilge :shock:

March 09, 2014, 01:46:31 PM
Reply #8

Dano

  • Information Offline
  • Posts: 58
Re: Through hull fitting
« Reply #8 on: March 09, 2014, 01:46:31 PM »
looks like my live well drain location…. my fish box one is smaller and located a little bit higher and forward of that one.

March 10, 2014, 01:02:32 PM
Reply #9

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: Through hull fitting
« Reply #9 on: March 10, 2014, 01:02:32 PM »
Quote from: "Dano"
looks like my live well drain location…. my fish box one is smaller and located a little bit higher and forward of that one.

So there's no misunderstanding, the thru hull shown in my post is for a 22-2 CCP. It is connected to the floor drain that resides under the coffin box that the models usually had. The box has a drain in it that is centered over the floor drain.


SDL has not mentioned the model but I'm guessing it's a 222 of some sorts.  :scratch:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal