Did a search but didnt see so here goes.I am doing a few upgrades this winter.I came across a Rule Oxygenator bait pump system.I am wondering if anyone have installed one in the Aquasport built in bait tank? (transom tank)I think it would work well, just dont know about the application.
Quote from: "icemanbryan"I am wondering if anyone have installed one in the Aquasport built in bait tank? (transom tank)You know who said he was.... viewtopic.php?p=72781#p72781Maybe he did.
I am wondering if anyone have installed one in the Aquasport built in bait tank? (transom tank)
Quote from: "icemanbryan"Did a search but didnt see so here goes.I am doing a few upgrades this winter.I came across a Rule Oxygenator bait pump system.I am wondering if anyone have installed one in the Aquasport built in bait tank? (transom tank)I think it would work well, just dont know about the application.Hi Bryan,Guess it depends on the bait of choice there. Over here, hardy baits like hardhead mullet, bull minnows, pinfish etc....an aerator system such as that works fine.In Florida...their hardy baits are the above, plus goggle eyes and blue runners. More fragile baits...you'll definitely want to go with a raw-water input/overflow system. More work, but if engineered correctly, works like a champ regardless of bait choice.There are a bunch of great examples here on rigging raw water systems. Basically, a 3/4 clamshell raw water pickup underneath, bronze through hull, seacock, pump, 3/4 hose to bottom of tank. 1 1/2 hose returns out of livewell at top, seacock at bottom of transom, 1 1/2 bronze through hull to discharge.If you choose to go this route check the Miss D rebuild pics....you'll see the system components before the deck went in. Scroll through the pics only 'till you find what you need On the tuna boats over there....the guys use anchovies, right? Are they hardy or fragile? What bait would you like to fish?Thanks for everything Bryan
A well timed flow is more important then adding 02.a 30-40 gallon tank with a 500-800gph pump should work. I would advise adding a valve to the inlet to adjust flow.It should take 8-10 minutes to fill a 30-40 gallon tank. To add air, all you need is a small check valve inserted somewhere on the inlet. This will allow air into the system and not water out. But this is really not necessary.By the way, I would consider squid a hardy bait. It's the anchovies you need to worry about. Those little guys are fragile.And of course the most important part of a tank is it's capacity. DO NOT OVERFILL with bait. A half scoop of live baits is better then a full scoop of dead ones.