Magic Tilt Cross-Member Weep Holes

[dxs217]

I have a new magic tilt aluminum trailer.

There are no weep holes on the bottom side of the cross members.

All of my other aluminum trailers had a weep hole drilled in the center of the cross members.

Should I drill one?

Any help is appreciated.

Thanks
Dan

[Aswaff400]

my magic tilt trailer doesn't have any holes also, i do spray freshwater inside each crossmember after dunking it, its an '07

[BStrailer]

Is your cross members aluminum or Galvanized ?
If they are aluminum it will not hurt to drill a 3/8 hole no bigger right in the bottom center.
But if they are galvanized they are going to rust if you do drill or if you don,t hard call .
you could drill a hole but keep plenty of paint on the hole area. really no good solution either way
Cliff@ B&S Trailer