Classic AquaSport
General Aquasport Forums => Aquasport Discussion => Topic started by: stanggt on October 11, 2012, 02:54:36 PM
-
Well after a month or so of working on her, I finally took her out today for a test run. All went well except it would not trim (up or down). I believe its low on fluid. The water pump I installed is working fine. I had 10-20 lbs pressure on the gauge the whole time under throttle. I made a few high speed runs, putted around for a while and then called it a day. Next time out I will be testing all pumps/lights/trolling motor. All in all I had fun even though I called it quits after and hour and a half.
(http://i215.photobucket.com/albums/cc307/stanggt9050/FFA1D7FA-A5DC-442E-AB8C-B0533D45A37B-13453-0000111894659164.jpg)
(http://i215.photobucket.com/albums/cc307/stanggt9050/E34773C2-63C0-4ABB-B524-6DF7751186D1-13453-00001118A18619C9.jpg)