Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Engines & engine woes => Topic started by: elbori00 on May 08, 2012, 12:35:43 PM

Title: Gauges Problem
Post by: elbori00 on May 08, 2012, 12:35:43 PM

I have a yamaha tach and speed gauge with I belive is a diplay problem. They were working fine but now the display is very clear and almost you can't see the number. One of you had this problem or there is a way to repair this.

Thanks in advance,

Alberto

Title: Re: Gauges Problem
Post by: flounderpounder225 on May 08, 2012, 02:06:48 PM

Quote from: "elbori00"

I have a yamaha tach and speed gauge with I belive is a diplay problem. They were working fine but now the display is very clear and almost you can't see the number. One of you had this problem or there is a way to repair this.

Thanks in advance,

Alberto

Digital Meters?? partial display of the numbers?  Fading in and out... typical of older Yami gauges.  How old are they?  Probably due for replacement.

Title: Re: Gauges Problem
Post by: Capt. Bob on May 08, 2012, 02:07:32 PM

Read um and weep. :cry:

viewtopic.php?p=71768#p71768 (http://www.classicaquasport.com/phpbb3/viewtopic.php?p=71768#p71768)

Good luck.

Title: Re: Gauges Problem
Post by: elbori00 on May 08, 2012, 03:25:07 PM

Thanks for the info. They are multifuntion tach and speed.

I just have them replace but I was asking if it can be something done with them to try get some $$ back. Also I have a Command link round tach (2006 and up) that I bought by mistake and want to get rid of it. If you know someone in need of one please let me know.

Alberto