Classic AquaSport

Aquasport Model Rebuilds, Mods, Updates and Refreshes => Center Console Professional (CCP) Rebuilds => 246/250 CCP Rebuilds => Topic started by: Aquaholic12 on April 18, 2012, 05:14:48 PM

Title: 87 250 ccp rest/mod
Post by: Aquaholic12 on April 18, 2012, 05:14:48 PM: Here's my 87 250 ccp. I Am planning on making it into a nice usable mild offshore boat. It has twin 140 loopers on it and I guess pics will speak for themselves. This will be my build thread.
When I first got her after a few hours of cleaning and a few days later I took her out.

(http://i208.photobucket.com/albums/bb185/aquaholic12/IMG043.jpg)

On the way home from the marina 2 of the supports on the trailer had failed and I had to rebuild the trailer. The cross supports had rusted through.

Off the trailer, it was only temporary so don't flame about the blocks.

(http://i208.photobucket.com/albums/bb185/aquaholic12/IMG052.jpg)

Got her back on the trailer and decided to repower. There was nothing really wrong with the evinrudes, but wanted something newer, and in had this laying around. Just hung her on today

(http://i208.photobucket.com/albums/bb185/aquaholic12/IMG066.jpg)

Now comes the rigging, a t-top, new leaning post and some more little and big things over the next few weeks.
Title: Re: 87 250 ccp rest/mod
Post by: seabob4 on April 18, 2012, 08:00:50 PM: Aqua,
Drop her in just for chits and giggles and see how she sits with the Vrod. Kinda fun seeing an old classic with the new motor hanging off the back end... :salut:
Title: Re: 87 250 ccp rest/mod
Post by: Aquaholic12 on April 18, 2012, 08:26:40 PM: I was actually planning on doing that Friday morning. Pics will follow. And i have several props to try so well get some numbers also. It is 80 pounds lighter than the twins so well see
Title: Re: 87 250 ccp rest/mod
Post by: pete on April 18, 2012, 09:25:53 PM: Welcome aboard bro,look forward to your resto!that v rod is a good start! :salut:
Title: Re: 87 250 ccp rest/mod
Post by: gran398 on April 18, 2012, 10:25:08 PM: Welcome!

Go run that girl, you'll be impressed.
Title: Re: 87 250 ccp rest/mod
Post by: seabob4 on April 18, 2012, 10:32:28 PM: Aqua, you got all the rigging for the Vrod? Looks like a Gen 1...say, '05-'06...
Title: Re: 87 250 ccp rest/mod
Post by: Aquaholic12 on April 18, 2012, 10:45:06 PM: It's a 06 with 75 hours. I have to call mercury parts express to try order the harness and dts binnacle. Have all the power steering and ect. Have a vessel view for it also.
Title: Re: 87 250 ccp rest/mod
Post by: Circle Hooked on April 18, 2012, 11:15:21 PM: Quote from: "seabob4"
Aqua, you got all the rigging for the Vrod? Looks like a Gen 1...say, '05-'06...

Great eye Bob, aqua your gonna love the boat :salut:
Title: Re: 87 250 ccp rest/mod
Post by: wingtime on April 19, 2012, 10:30:29 AM: Quote from: "Aquaholic12"
There was nothing really wrong with the evinrudes, but wanted something newer, and in had this laying around.

Just had a vrod laying around! LOL must be nice have any more kicking around in your way? I'll haul em off for ya! :wink:
Title: Re: 87 250 ccp rest/mod
Post by: Aquaholic12 on April 21, 2012, 03:23:30 PM: Picked up the mercury vessel veiw today instead of smartcraft gauges and ordered the rigging for it. Have it in the water on Wednesday. :cheers:
Title: Re: 87 250 ccp rest/mod
Post by: seabob4 on April 21, 2012, 04:59:46 PM: Aqua, where do you plan to locate the PS pump? Just leave it on the deck aft to get her up and running, or were you thinking console from the get go? No, no, no on sticking it in the bilge, they don't like damp areas...and remember, drill some drain holes in the reservoir box...
Title: Re: 87 250 ccp rest/mod
Post by: Aquaholic12 on April 23, 2012, 05:45:52 PM: I decided to just use the regular seastar helm instead of running the power steering. Needed the power steering for my other boat. It should be in the water at the end of this week, I had decided to re-wire the entire boat, :cheers: :cheers:
Title: Re: 87 250 ccp rest/mod.....updates
Post by: Aquaholic12 on August 18, 2012, 05:20:30 PM: Long time no post.

Well, I had put her in the water with the single verado, she sat level. I decided I wanted to run twins again on this boat so I ended up installing the verado on my other boat and started doing the transom. Enclosed it and put a bracket on it. Bolted two longshaft evinrudes on it to check to see if it was high enough to run twin long shaft motors. Perfect. Now I am fairing and painting it and when done I will rig it with twin 200 verados. I'll keep posting pics as it goes on. Now I have time to get here done.

(http://i208.photobucket.com/albums/bb185/aquaholic12/IMG121.jpg)
Title: Re: 87 250 ccp rest/mod
Post by: GoneFission on August 18, 2012, 05:34:45 PM: She ought to go with twin 200 VRods! :twisted:
Title: Re: 87 250 ccp rest/mod
Post by: Aquaholic12 on August 18, 2012, 06:25:28 PM: That she should. :mrgreen: she looks rough now because I'm painting her. More pics

(http://i208.photobucket.com/albums/bb185/aquaholic12/IMG113.jpg)

Determining shaft length

(http://i208.photobucket.com/albums/bb185/aquaholic12/IMG130.jpg)

Also have a new trailer for her as soon as she's done
:cheers:

Also decided on doing a tuna door on the transom now. LOL. It never ends
Title: Re: 87 250 ccp rest/mod
Post by: tastiejeep on January 11, 2015, 08:32:08 PM: :bravo_2:
I love the flat back , wish mine was. Im just finishing a restro mod 78 25ccp I have a threadfor it and I need to add new pics keep up the good work. How much did that plat form run?
Title: Re: 87 250 ccp rest/mod
Post by: Capt. Bob on January 11, 2015, 08:46:39 PM: May take awhile on the reply.

A12 hasn't been visited in over two years.
Title: Re: 87 250 ccp rest/mod
Post by: Aprats250CCP on March 02, 2016, 07:51:10 PM: I also have a 250 CCP 1989

I have 1993 twin evinrude 2 strokes, closed transom and platform. Love this boat, check it out.