Classic AquaSport

Aquasport Model Rebuilds, Mods, Updates and Refreshes => Osprey Style Hull Rebuilds => 22-2 Rebuilds => Topic started by: gsmfamily4 on April 12, 2011, 06:44:54 PM

Title: center console cap mold on 222 1979
Post by: gsmfamily4 on April 12, 2011, 06:44:54 PM

Hey does anyone out there know of a cap mold for the center console? 222 or if there is a company that is reproducing them?

Title: Re: center console cap mold on 222 1979
Post by: fitz73222 on April 12, 2011, 09:00:40 PM

Hey GSMfamily4,

You are looking for the original mold for the console? What is the issue with your current console?

Title: Re: center console cap mold on 222 1979
Post by: gran398 on April 13, 2011, 01:25:06 PM

Or are you looking for the gunnel cap mold?

Title: Re: center console cap mold on 222 1979
Post by: fitz73222 on April 13, 2011, 03:41:29 PM

Try Bayside Marine in Tampa. They have a mold for the replacement bow deck and a preformed closed transom mold for 22-2's They may also have a cap mold.

Title: Re: center console cap mold on 222 1979
Post by: gsmfamily4 on April 14, 2011, 05:17:27 PM

yes the gunnel cap mold, This particular hull does not have one I am starting from scratch. Thank you for the responces

Title: Re: center console cap mold on 222 1979
Post by: gran398 on April 14, 2011, 08:34:10 PM

Per Fitz, Bayside. If they don't have one, there are other Aquasport rebuilders in Tampa that may have an original from a junker.

Where are you located?

Title: Re: center console cap mold on 222 1979
Post by: orb on April 15, 2011, 10:31:33 AM

I am in the same position with my 1978 222. I am converting a family fisherman to a center console. I called Tommy at Hammerhead boat works. He said he can make a cap for about $3K. That is a little more than I wanted to spend, so I am planning on making my own cap. I think hammerhead has a mold.

There is another guy on this site that built his own cap. I am not sure of his name at the moment, but you can search the site.