Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Anchors, Power Anchors (Power Pole and Talon) and Windlass => Topic started by: GMALAVOLTA on February 09, 2011, 08:16:26 AM

Title: Windlass
Post by: GMALAVOLTA on February 09, 2011, 08:16:26 AM

I would like to install a windlass in my 2004 27.5 explorer. It is prewired from factory to the achor locker. Two #4 wires and 4 control wires, all number marked. However i can not trace the wires back to there source. can anyone help?

Title: Re: Windlass
Post by: seabob4 on February 09, 2011, 08:51:14 AM

The smaller gauge wires that go to the switch or contactor should be behind your helm.  The 4GA cables will probably end in the bilge near the starboard battery.