Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Electrical => Topic started by: fishingdave on April 01, 2010, 10:09:26 PM

Title: shore power setup, 225ex ??
Post by: fishingdave on April 01, 2010, 10:09:26 PM

I got all my components for my shore power , just wonder if some can post pics of where the installed the inlet, panels , outlets etc.. also  did anyone bond all there thruhull fitings? what did you use to bond them?

Title: Re: shore power setup, 225ex ??
Post by: fishingdave on April 16, 2010, 07:56:17 PM

anyone?

Title: Re: shore power setup, 225ex ??
Post by: seabob4 on April 16, 2010, 09:00:40 PM

Dave,
When I was there, we never installed shorepower on a 225 or 245/250.  Do you want to know my opinion on how to do it?  Easy, but I can just run you through the component install, I can't provide you pics... :thumleft:

Title: Re: shore power setup, 225ex ??
Post by: Circle Hooked on April 16, 2010, 09:41:17 PM

Bob i would be interested in how to set that up,thanks.

Title: Re: shore power setup, 225ex ??
Post by: seabob4 on April 16, 2010, 10:14:01 PM

Quote from: "Circle Hooked"

Bob i would be interested in how to set that up,thanks.

Gentlemen,
I shall have a drawing tomorrow, based on MY opinions on how I would do it...hull inlet on the port side above the sink, keeps the AC runs short in the cabin should you want to place a micro on top of the sink.  Remove the b/head behind the sink and the companionway door sill to run a feed to the starboard side to install a duplex outlet.  Locate the AC panel in the b/head behind the sink, as well as the galvanic isolator behind the b/head.  GFCI's at both outlets...but then you have to ground the 120AC ground to the 12VDC ground bus, which is on the starboard side...


Drawing tomorrow... :salut:

Title: Re: shore power setup, 225ex ??
Post by: seabob4 on April 17, 2010, 07:26:34 PM

Alright guys, here's a schematic on how to install shorepower on your Explorers...
(http://i259.photobucket.com/albums/hh301/seabob4/Proline%20website%20pics/Wiring%20Diagrams/ShorepowerDrawing2.jpg)
Remember, use GFCI outlets on both sides, and be sure to tie in the 120VAC ground to the 12VDC ground...

Feel free to parse, dissect, criticize, call me an idiot, or send me a beer! :cheers:

Bob C

BTW, if you want it in PDF form, let me know...

Title: Re: shore power setup, 225ex ??
Post by: Circle Hooked on April 18, 2010, 08:49:43 PM

Thanks Bob.

Title: Re: shore power setup, 225ex ??
Post by: fishingdave on July 04, 2010, 12:22:53 PM

where would you mount the power inlet? on portside front or on the rear?

Title: Re: shore power setup, 225ex ??
Post by: seabob4 on July 04, 2010, 02:21:31 PM

Quote from: "fishingdave"

where would you mount the power inlet? on portside front or on the rear?

Dave,
Aft, just forward of where the seat base ends, and about 10" up from the walkaround...

Title: Re: shore power setup, 225ex ??
Post by: fishingdave on July 04, 2010, 09:05:15 PM

so pretty much where the railing starts, kind of mid ship?

Title: Re: shore power setup, 225ex ??
Post by: seabob4 on July 04, 2010, 09:16:45 PM

Quote from: "fishingdave"

so pretty much where the railing starts, kind of mid ship?

Kinda like midship...