Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Fuel tanks and anything about fuel systems => Topic started by: 75classic on March 14, 2010, 10:11:09 PM

Title: Dimensions for a 19-6 50gallon gas tank?
Post by: 75classic on March 14, 2010, 10:11:09 PM

Does anybody have the exact dimensions for a 19-6 50 gallon gas tank? Im in the market for a new one and want to get the right size. thanks

Brandon

Title: Re: Dimensions for a 19-6 50gallon gas tank?
Post by: Capt. Bob on March 15, 2010, 08:12:50 AM

This is who you want in your area.

viewtopic.php?p=33591#p33591 (http://www.classicaquasport.com/phpbb3/viewtopic.php?p=33591#p33591)

You didn't say what year (but your user name does suggest a 75) :idea:  so read the whole thread. This is a recent 19-6 replacement, circa 1975

Skoot probably has the dims. you seek.

Good luck.

Title: Re: Dimensions for a 19-6 50gallon gas tank?
Post by: Skoot on March 15, 2010, 09:04:26 AM

Yup, those dimensions are accurate to an original 1975 50 gallon tank. My new tank is currently in production, just got the drawings from RDS today.  I did slightly modified the original tank height to an even 8". This made the tank 45gallons instead of 50gal.  The reason I did this was because the old tank was laying flat on plywood and it only left about 1/4" of clearance from the top of the fill and vent tubes to the bottom of the hatch cover.  I plan on raising it off the plywood to allow air flow and I didnt want to run into problems with the cover hitting the top of the tank.

I would try to get a hold of seabob4. He hooked me up, and might be able to do the same for you. :cheers:

Title: Re: Dimensions for a 19-6 50gallon gas tank?
Post by: 75classic on March 15, 2010, 04:19:57 PM

thanks for the info :thumleft:  I apologize for not give the year of the boat.

brandon