Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Electrical => Topic started by: Mark Sr on December 17, 2009, 10:11:27 AM

Title: Need pics of guage packages
Post by: Mark Sr on December 17, 2009, 10:11:27 AM

I might be getting a restored 222 ccp hull.Nothing else but the hull.Console has nothing on it.Need pics of a 222 console with guages,steering.etc. Want to get an idea as where to place everything.

Mark Sr

Title: Re: Need pics of guage packages
Post by: Capt. Bob on December 17, 2009, 12:28:11 PM

Mark,
What year?

Title: Re: Need pics of guage packages
Post by: seabob4 on December 17, 2009, 01:54:39 PM

Please and thank you work wonders, too... 8)

Title: Re: Need pics of guage packages
Post by: GoneFission on December 17, 2009, 09:32:30 PM

Mark:  There are mainly 2 different versions of the CCP console, pre-81 and post-81.  So the year is somewhat important.  Later Genmar versions also had more changes.  What year model are you looking at?

Title: Re: Need pics of guage packages
Post by: Mark Sr on December 18, 2009, 02:24:41 PM

Sorry guys,it's a 1978.All holes in console where closed up and re-painted.

Mark Sr

Title: Re: Need pics of guage packages
Post by: GoneFission on December 20, 2009, 05:38:06 PM

My 22-2CCP is an 80 model, about the same as your 78.  Here is about what yours looked like as original - I put in the radio setup and a few other changes, but the layout is pretty original:

(http://i76.photobucket.com/albums/j7/GoneFission/GoneFissionInstrumentPanel3-06.jpg)  

See ya on the water!

Title: Re: Need pics of guage packages
Post by: Mark Sr on December 20, 2009, 09:10:02 PM

Thanks for the pic Capt'n. Are your batteries under the console.This boat has to be totally re wired.You wouldn't have a wiring diagram would you.L.O.L. Anything about the boat would help.
Thanks

Mark Sr

Title: Re: Need pics of guage packages
Post by: Capt. Bob on December 21, 2009, 09:52:29 AM

Quote from: Mark Sr

This boat has to be totally re wired.You wouldn't have a wiring diagram would you.L.O.L. Anything about the boat would help.
Thanks

Mark Sr

Here are a few places to start/ponder depending on what you eventually plan to do.

http://classicaquasport.com/smf/index.php?topic=3424.0

http://classicaquasport.com/smf/index.php?topic=1709.0

Try and avoid this
 (http://i237.photobucket.com/albums/ff108/r-berlin/InstrumentPanel2.jpg?t=1261407014)

There's a lot more out there. The web has wiring plans (I believe one or more has been posted here) so take your time and make a game plan.

Good luck.

Title: Re: Need pics of guage packages
Post by: GoneFission on December 21, 2009, 10:04:00 AM

Never seen an Aquasport wiring diagram - I think they just ran the wiring as needed in the 70s and 80s.  :roll:  

But remember there were a lot fewer electronics then.  :scratch:  

So plan carefully and you can rewire and upgrade.  Most all the work will be in the console, with a couple new lines going to the motor and maybe forward if you intend to install a trolling motor in the future.  

Good luck and see ya on the water!

Title: Re: Need pics of guage packages
Post by: Mark Sr on December 21, 2009, 10:49:35 AM

Captn Bob

Thanks for the diagram.It's a start.I don't have the hull yet but this will give me time to think and figure things out.
Thanks all who contribute.
Merry Xmas

Mark Sr