Classic AquaSport

Aquasport Model Rebuilds, Mods, Updates and Refreshes => Osprey Style Hull Rebuilds => 165/170/175 Rebuilds => Topic started by: Marcq on May 19, 2008, 01:36:02 PM

Title: Foam in the 170?
Post by: Marcq on May 19, 2008, 01:36:02 PM

Just wondering, is there foam just inside the stringer in my boat ?

Marc..

Title:
Post by: scyharris on May 19, 2008, 08:43:49 PM

When I had the innerliner tore out to replace the transom in my 1984 17', the only place that was foamed were the inside of the stringers and a little between the hull and liner.  The rest is absolutely wide open!  Hope that helps.

Title:
Post by: Marcq on May 20, 2008, 02:02:29 AM

Thanks, wasn't sure if there was some on each side of the stringers

Marc..

Title:
Post by: MJB on May 21, 2008, 08:59:42 AM

My 1976 170 had foam on the inside of the stringers and on the outside of the stringers between the stringer and outer hull the entire length of the boat.  Not sure about the 1979 model year.