Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Engines & engine woes => Topic started by: ralpht44 on May 24, 2007, 09:34:50 PM

Title: Floscan
Post by: ralpht44 on May 24, 2007, 09:34:50 PM

I just recently bought a 22' Sandpiper. I noticed I have a floscan installed in lieu of a tachometer and gas gauge. It is the 7000 series. I just filled up the 85 gallon tank full and was informed that the floscan should be reset every time you fill up so you know how much your burning and what is in the tank. Anyone have a handle on how to reset this?

Title:
Post by: John Jones on May 24, 2007, 10:22:37 PM

206-524-6625

OR

service@floscan.com

Title:
Post by: RickK on May 25, 2007, 05:19:24 AM

Go here (http://www.floscan.com/html/blue/gas_installation.php), click on the type you have and an installation manual will appear (if you have adobe reader installed - you can get adobe reader at the top of the form also)

Title:
Post by: John Jones on May 25, 2007, 08:02:10 AM

I browsed through the installation manual.  I did not see any operating instructions.

Title:
Post by: ralpht44 on May 25, 2007, 08:57:53 AM

That makes two of us. Browsed the whole thing and found nothing. I emailed them this morning so I will wait to see what they say.

Title:
Post by: RickK on May 25, 2007, 10:00:37 AM

I found it but didn't read it - was it in chinese? :wink:   Seems odd not to have the Ops in there too.  Sorry for the diversion.

Quote

Requires 1 SPST push button panel switch for resetting fuel totalizer reading. See Accessories page for recommended push button switch (MP39680) for this feature.  

http://www.floscan.com/html/blue/seriesdetail.php?sid=2&catid=3

Title:
Post by: John Jones on May 25, 2007, 10:12:47 AM

I have installed the analog floscans and knew they required a reset button.  I was not going to guess on the digital ;)

Title:
Post by: ralpht44 on May 30, 2007, 03:12:45 PM

Hey Guys, thanks for all the help. I actually located a pull out switch that was the reset for the Floscan. I tried to see what switches went where and I was able to figure it out by process of elimination.