Classic AquaSport
Aquasport Model Rebuilds, Mods, Updates and Refreshes => Family Fisherman/Dual Console/Sport Rider Rebuilds => Topic started by: Scode68 on December 23, 2023, 11:14:46 AM
-
Just wanted to post that I found one that fits the bill. I purchased a Five Oceans FO-2347 Marine Access Hatch and it fits and looks great. Other than having to drill new mounting screw holes and trimming the deck opening a little in the hinge area the hatch fits great. It can be purchased directly from FIVEOCEANS or from them through Amazon and was only $70-80. Pictures to follow when the boat gets uncovered.
Specs:
Outside Dimensions: 15-11/16" x 12-7/8" (398mm x 327mm)
Inside Dimensions: 11-1/8" x 8-1/4" (282mm x 209mm)
Cutout: 12-1/2" x 9-11/16" (317 mm x 246 mm) x 1" (25 mm) (hatch hinges)
Low Profile at 3/8" (10mm) above the mounting surface. Intrusion below deck: 3/4" (19mm)
-
It's a bit dirty but here it is.
(https://i.postimg.cc/437G0Hg3/20240607_165402.jpg)
-
Looks like it seals up nice and tight too. :thumleft: