Classic AquaSport

General Aquasport Forums => Aquasport Discussion => Topic started by: rhtrades on October 10, 2023, 09:16:24 AM

Title: Non-Skid Deck Pieces
Post by: rhtrades on October 10, 2023, 09:16:24 AM

Does anyone know if there is a company that sells pieces (by the foot) of Fiberglass Non-Skid decking?

Title: Re: Non-Skid Deck Pieces
Post by: RickK on October 10, 2023, 03:42:44 PM

I've not heard of this product. Is it like sea deck?

Title: Re: Non-Skid Deck Pieces
Post by: Mwar410 on October 11, 2023, 04:52:01 AM

There’s  a company that sells repair molds by the foot, you can almost match any factory non skid in the gelcoat.
Gibco flex-mold

Title: Re: Non-Skid Deck Pieces
Post by: rhtrades on October 11, 2023, 09:50:16 AM

Thank you!   

Title: Re: Non-Skid Deck Pieces
Post by: rhtrades on October 11, 2023, 12:08:26 PM

Rick,
 not like SeaDek.  I'm talking about actual fiberglass decking.  A while back, i bought an access deck hatch to go over the fuel sender area. The hatch is not water tight.  I want to put one in that is watertight, but i can't find anything that is the same size as that deck hatch, only smaller.  To install a smaller one, i need deck material...don't want to have to make myself out of fiberglass cloth, resin and then gelcoat....

Title: Re: Non-Skid Deck Pieces
Post by: RickK on October 11, 2023, 06:27:54 PM

 :thumleft:

Title: Re: Non-Skid Deck Pieces
Post by: msteinkampf on October 17, 2023, 09:30:58 AM

I think you will need to make your own gelcoat using a mold that you either buy (https://gibcoflexmold.com/ (https://gibcoflexmold.com/)) or make yourself (https://www.youtube.com/playlist?list=PLV97GZkHhpHPXBTjmCeNuElLv0Luq1BQ4 (https://www.youtube.com/playlist?list=PLV97GZkHhpHPXBTjmCeNuElLv0Luq1BQ4)).

M