Classic AquaSport

General Aquasport Forums => Aquasport Resources => Topic started by: portcanaveralflorida on May 25, 2022, 03:16:11 PM

Title: Under Gunnel Nylon Insert
Post by: portcanaveralflorida on May 25, 2022, 03:16:11 PM

I have a 1998 17.5 and looking for these inserts for the rod-holders, any help would be appreciated.

Title: Re: Under Gunnel Nylon Insert
Post by: Fish Head on May 26, 2022, 12:52:33 PM

https://www.replacementboatparts.com/2idwhitetrimring.aspx?gclid=EAIaIQobChMIn77Y4M_99wIV-21vBB3A_AZkEAQYDSABEgKqUfD_BwE
Found these online, might need to custom fit them.

Title: Re: Under Gunnel Nylon Insert
Post by: RickK on May 26, 2022, 05:31:49 PM

Nice find FH!!

Title: Re: Under Gunnel Nylon Insert
Post by: portcanaveralflorida on May 26, 2022, 06:06:42 PM

Thanks FH, I did run across those too on my hunt tho I had a issues with the item was not 1" deep only 1/2 and there's wood that I really don't want to get wet (photo shown)  suggestions on I guess I could run a small beed of resin on the wood and prevent any water getting inside (rinsing down etc) If anyone knows or has taken this apart is this area could i go with this 1/2 Tailpiece length?  The 1" Tailpiece length covered this....(again please see photo)  suggestions.

Title: Re: Under Gunnel Nylon Insert
Post by: Capt. Bob on May 28, 2022, 08:19:31 AM

What you're looking for are these.

https://classicaquasport.com/smf/index.php?topic=9671.msg83927#msg83927

Marine East"s website is currently down but you can call them.
https://www.google.com/search?client=firefox-b-1-d&q=marine+east

I used these on my 91 WAC.
(https://classicaquasport.com/gallery/data/500/rod_grommet.jpg) (https://classicaquasport.com/gallery/showphoto.php?photo=5921&title=rod-grommet&cat=500)

Good luck. :thumright:

Title: Re: Under Gunnel Nylon Insert
Post by: portcanaveralflorida on May 28, 2022, 10:28:07 AM

SUPER HELPFUL!  Will call them up and order a few, thanks again! :salut2: