Classic AquaSport
Aquasport Model Rebuilds, Mods, Updates and Refreshes => Osprey Style Hull Rebuilds => 22-2 Rebuilds => Topic started by: dakota on March 18, 2021, 06:13:54 AM
-
:051bye: hi, I need to know about fiberglass. I am working on very close buget.I took off the leaning pads on 2 sides of gunnels inside. I saw a 2+inch hole fom something put there before pads. anyway under gunnels in a few spots old waffle like glass webs (6-7") are hanging. I was told its from the molding process and comes from release on mold in factory. anoher said to remove & put another glass layer in. can anyone say what is right to do.!! thanks, dakota
-
I would agree with the person that said that.
Always put your boat year and model when you post or keep all your posts in the same topic so we know that info when we reply or you can make a signature (see mine below) - click on Profile in the upper bar and then click Forum Profile.
-
for the 2 inch hole, if it was a cleanly cut hole & not causing any issues I'd be inclined to find a cover plate that fits nicely and screw that over the hole. Glassing over the hole, fairing, painting, and getting to not look like a repair was done will be a lot of work if you haven't done this before. Most of us fall into that category.