Classic AquaSport

Aquasport Model Rebuilds, Mods, Updates and Refreshes => Generic Aquasport Rebuilding Topics => Topic started by: LI Explorer 96 on October 12, 2020, 10:17:07 AM

Title: 1996 225 Explorer cockpit lights quwstion
Post by: LI Explorer 96 on October 12, 2020, 10:17:07 AM

Hello. I am the proud new owner of a 1996 Explorer 225 Hardtop. The prior owner did a bit of a hatchet job with some of the wiring of the cockpit (court) lights, fishbox pump and aft bilge. Does anyone have a wiring diagram they can share? Also, minus hiring a very small mechanic, is there a secret trick into getting to to the aft bilge area down by the pump? Thanks.
Best regards,
Pat B.

Title: Re: 1996 225 Explorer cockpit lights quwstion
Post by: Capt. Bob on October 12, 2020, 12:42:58 PM

There's not a schematic per say for our hulls but we have this.
https://classicaquasport.com/smf/index.php?topic=15548.0

A lot of stuff to wade through but you can get a general idea of where things are and the wiring color code that was used. It may or may not help.

For access you need to think about this.
https://classicaquasport.com/smf/index.php?topic=15548.0

Title: Re: 1996 225 Explorer cockpit lights quwstion
Post by: LI Explorer 96 on October 12, 2020, 04:36:29 PM

Thank you very much for the information.