Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Electrical => Topic started by: Thunderyacht on August 30, 2015, 08:12:59 PM

Title: Ignition schematic?
Post by: Thunderyacht on August 30, 2015, 08:12:59 PM

Is there a way to get the wiring schematic for an 01 Osprey 250 with twin 150 Evinrudes?  The mechanic put in a new ignition switch, see previous post, and I'm sure it's wired wrong. Starts when key is turned on, turn to start and gauges work and it goes through pre-start check, lights on gauge  count down, beep, etc. It is not the same as other switch, different poles to screw wires to.  I'm looking for something to tell me which wire does what coming from ignition to motor, I.e. Purple wire, brown wire with white stripe, etc.  ground I've got figured out.
Thanks.

Title: Re: Ignition schematic?
Post by: Capt. Bob on August 31, 2015, 07:54:29 AM

Here's a start.

http://forums.iboats.com/forum/engine-repair-and-maintenance/johnson-evinrude-outboards/450917-ignition-switch-wiring-diagrams

Be sure to scroll through the thread.

Good luck.
 

Title: Re: Ignition schematic?
Post by: Thunderyacht on August 31, 2015, 06:25:23 PM

Quote from: Capt. Bob on August 31, 2015, 07:54:29 AM

Here's a start.

http://forums.iboats.com/forum/engine-repair-and-maintenance/johnson-evinrude-outboards/450917-ignition-switch-wiring-diagrams

Be sure to scroll through the thread.

Good luck.

Thank you sir!