Classic AquaSport

Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Controls, Steering, and Trim Tabs => Topic started by: BowMovements on February 07, 2014, 01:50:04 PM

Title: Trim tabs
Post by: BowMovements on February 07, 2014, 01:50:04 PM

What does everybody have on their 222s?  Is 9x12 sufficient?

Title: Re: Trim tabs
Post by: Capt. Bob on February 07, 2014, 02:57:33 PM

Here's a bunch on tabs. You'll need to wade through to see specifics.

search.php?keywords=trim+tabs&terms=all&author=&fid (http://www.classicaquasport.com/phpbb3/search.php?keywords=trim+tabs&terms=all&author=&fid)

I had 18" x 9"s on my 222 CCP.
Moved them to my 21 WAC.

Title: Re: Trim tabs
Post by: Aswaff400 on February 07, 2014, 05:56:01 PM

i had 9x12's on my 200 osprey,  i will be installing 12x12's on my 22-2 flat back when the time comes

Title: Re: Trim tabs
Post by: Curious on February 07, 2014, 08:27:00 PM

Bennett M120 Sport Tabs, 10x12.

Title: Re: Trim tabs
Post by: Tabman on February 08, 2014, 07:55:59 AM

Quote from: "BowMovements"

What does everybody have on their 222s?  Is 9x12 sufficient?

I would suggest either the 10 x 12 M120s or 12 x 12s.  Either one would be better than the 12 x 9s and since they will have to be deflected less to create the same amount of lift they will generate less drag.

Tom McGow
Bennett Marine

Title: Re: Trim tabs
Post by: GoneFission on February 08, 2014, 11:19:59 AM

If Tabman Tom says it - you can take it to the bank...   :salut:

Title: Re: Trim tabs
Post by: Capt Matt on February 08, 2014, 07:42:18 PM

12x12s

Title: Re: Trim tabs
Post by: BowMovements on February 10, 2014, 06:33:57 AM

:thumleft:   Thanks guys