Attention: Have 2 pages to see today

Author Topic: 215DC repower question 🙋‍♂️  (Read 93 times)

April 09, 2024, 09:28:32 PM
Read 93 times

Aqualife

  • Information Offline
  • Posts: 5
215DC repower question 🙋‍♂️
« on: April 09, 2024, 09:28:32 PM »
Getting ready to repower my 1999 215DC. Pretty sure I’m going with a Suzuki 200. Current motor is a 1999 Johnson 200. Couple of questions below - all input is welcome.

- Often idle in and out of shallow waters. Any suggestions on a Jack plate? Brand, setback, etc?
- Looking to add trim tabs. Electric vs. hydraulic? What size?

Thanks
Trey
1999 Aquasport 215 DC - Johnson 200
2006 Mitzi Skiff 17’ - 60hp Etec

April 12, 2024, 08:10:17 AM
Reply #1

plugger

  • Information Offline
  • Posts: 65
Re: 215DC repower question 🙋‍♂️
« Reply #1 on: April 12, 2024, 08:10:17 AM »
I did that exact motor swap…. No idea about a Jack plate etc….

April 16, 2024, 08:26:32 PM
Reply #2

Aqualife

  • Information Offline
  • Posts: 5
Re: 215DC repower question 🙋‍♂️
« Reply #2 on: April 16, 2024, 08:26:32 PM »
Plugger - what’s your top speed and what prop are you running?
1999 Aquasport 215 DC - Johnson 200
2006 Mitzi Skiff 17’ - 60hp Etec

April 17, 2024, 08:10:48 AM
Reply #3

plugger

  • Information Offline
  • Posts: 65
Re: 215DC repower question 🙋‍♂️
« Reply #3 on: April 17, 2024, 08:10:48 AM »
Not a WOT guy but I’ve touched 40 mph and in a twenty footer that’s plenty
Have had a 3/16/20 and a 3/16/18.5 both Suzuki props not much difference.

April 17, 2024, 01:05:16 PM
Reply #4

Aqualife

  • Information Offline
  • Posts: 5
Re: 215DC repower question 🙋‍♂️
« Reply #4 on: April 17, 2024, 01:05:16 PM »
Thanks for the info!
1999 Aquasport 215 DC - Johnson 200
2006 Mitzi Skiff 17’ - 60hp Etec

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal