Classic AquaSport
Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter => Electrical => Topic started by: dgrs2 on July 14, 2021, 10:57:01 AM
-
I have a 97 225 Explorer. Getting the little things operational. Raw water wash pump died. Found the inline fuse was eroded. Replaced it and the pump is working. I’m trying to figure out why the live well light does not work. Checked the bulb, it’s good. I think the fuse above the switch is ok. It’s not popped. Are there any other inline fuses I can check? The two courtesy lights in the transom area also are not working. Any ideas? Thanks! Great information in this forum. Thanks for the add!!!