Aquasport Model Rebuilds, Mods, Updates and Refreshes > Generic Aquasport Rebuilding Topics
rub rail off & there is 4 -1" diameter holes
HIFLUTIN:
Took my rub rail off & there is 4 -1" diameter holes that go thru the Hull cap on each side
They were filled with 5200.
Does anyone know if this from the factory?
If so for what?
Thanks
slvrlng:
Not sure without pics.
seabob4:
--- Quote from: "HIFLUTIN" ---Took my rub rail off & there is 4 -1" diameter holes that go thru the Hull cap on each side
They were filled with 5200.
Does anyone know if this from the factory?
If so for what?
Thanks
--- End quote ---
Emphatically, NO, that wasn't from the factory! Are the holes in proximity to any vent hoses or pump discharges? This I'd like to see...
But, as always...
gman 82 aquasport:
I have a 82 Aquasport 19.6 with the same type holes in the cap and hull, was told by a local boat guru that they were for cap alignment when origonally installed... made sense but not totally sure it's accurate..
HIFLUTIN:
Here is a pic of whats on mine.
Not sure of what it is
Navigation
[0] Message Index
[#] Next page
Go to full version